By the end of this chapter you'll be able to…

  • 1Decide whether a limit exists by evaluating both one-sided limits, especially for expressions containing a modulus or greatest-integer function
  • 2Evaluate indeterminate forms using series expansions, the squeeze theorem, and L'Hopital's rule with attention to its hypothesis
  • 3Handle the form using and explain why the rule is valid
  • 4Classify a discontinuity as removable, jump, infinite or oscillatory, and find constants that make a piecewise function continuous
  • 5Test differentiability from the two one-sided derivatives, and determine where a modulus or a maximum of two functions fails to be differentiable
  • 6Apply the intermediate value theorem, Rolle's theorem and the mean value theorem, including the indirect uses that bound a difference or limit a root count
💡
Why this chapter matters in JEE Advanced
This is the chapter Advanced uses to separate conditions that usually travel together. Main tests functions that behave; Advanced tests functions built so that a limit exists without the value matching, or continuity holds without differentiability, or a derivative exists without being continuous. Every such example is constructed by attaching an oscillation, a modulus, a greatest-integer function or a piecewise definition at one point, and recognising that construction is most of the work. The techniques also underpin the whole of calculus that follows, since a curve-sketching or optimisation question is worthless if the function is not differentiable where the method assumes it is.

Before you start — revise these

🔗
Graphs of the standard elementary functions, including modulus and greatest-integer
🔗
Differentiation of standard functions and the product, quotient and chain rules
🔗
The binomial series and the expansions of the exponential, logarithmic and trigonometric functions
🔗
Radian measure and the standard trigonometric identities

Limits, Continuity and Differentiability

Every differentiable function is continuous. Is every derivative continuous?

No. Take

At the origin the definition gives , because and the squeeze theorem finishes it. So is differentiable everywhere. But away from the origin,

and as the first part tends to while oscillates between and forever. So does not exist, even though does.

This is the shape of the whole chapter at Advanced level. Main tests functions that behave; Advanced tests functions built specifically to separate two conditions that usually travel together — a limit from a value, continuity from differentiability, the existence of a derivative from the continuity of that derivative. Every such example is constructed by attaching an oscillation, a modulus, a greatest-integer function or a piecewise definition at exactly one point.

y = x squared and its negative f(0) = 0 and f'(0) = 0 the envelope forces the value to zero, but the slope keeps swinging as x tends to 0

1. What a limit requires, and the standard ones

A limit exists only when both one-sided limits exist and agree. That is the whole definition, and almost every "does the limit exist" question is answered by computing the two sides separately — which is compulsory whenever the expression contains a modulus, a greatest-integer function, an exponent that changes sign, or a piecewise definition.

The standard limits are worth knowing as a block, because they are the vocabulary in which every harder limit is expressed:

together with and .

Two further tools handle everything the standard limits do not reach. The squeeze theorem says that if near and both outer functions tend to the same value , then so does . It is the only way to evaluate a limit whose expression oscillates, since no algebraic manipulation can tame .

The other tool is a conversion. The forms and are not directly indeterminate in any usable sense, so they are rewritten as or before anything else happens: combine two fractions over a common denominator for the first, and move one factor into a denominator as its reciprocal for the second.

A limit as is handled by dividing numerator and denominator by the highest power present, or by substituting and letting , which converts every result in this chapter into a statement about the origin.

Illustration 1

Evaluate .

The first standard limit is a statement about radians. Converting, radians, so

The answer is not . Every trigonometric limit and every derivative of a trigonometric function assumes radian measure, and this is the one place the assumption is tested directly.

Illustration 2

Show that does not exist, but does.

The first has left limit and right limit , so it fails. For the second, the greatest-integer function satisfies . Multiplying by and squeezing gives a limit of from the right, and repeating with , which reverses the inequalities, also gives . So the limit is .

2. Expansions beat repeated differentiation

For a limit of the form at the origin, substituting the first few terms of a series is faster and safer than applying L'Hopital's rule several times. The four expansions needed are

along with . Keep terms only to the order the denominator demands.

Illustration 3

Evaluate .

Substituting the expansion, the numerator is , so the limit is . Three applications of L'Hopital's rule give the same answer with three chances to slip, and each application requires re-checking that the form is still indeterminate.

Illustration 4

Evaluate .

The expansion of removes exactly the three subtracted terms, leaving , so the limit is . When a numerator is built to cancel the leading terms of a known series, the expansion is not merely faster — it is the only method that makes the structure visible.

Illustration 5

Show that L'Hopital's rule cannot be used on .

The limit itself is easy: . But differentiating top and bottom gives , which oscillates and has no limit at all.

The rule states that if the limit of the ratio of derivatives exists, then it equals the original limit. It never says the converse. Applying it and concluding "the limit does not exist" is a genuine error, and this form is set to catch it.

3. The form

Expressions such as are indeterminate because the base tends to from an unknown side at an unknown rate. Writing and expanding gives the working rule

valid whenever and .

Illustration 6

Evaluate .

Here and , so the exponent tends to and the limit is .

Note what would go wrong without the rule: the base tends to and the exponent to infinity, and reading the answer as ignores the rate at which the base approaches .

Illustration 7

Evaluate .

The base tends to , so use the rule. Now

Multiplying by gives , so the limit is .

A last remark on when the rule is safe. The exponential form relies on , which is only the first term of the logarithmic series, so it is valid precisely because makes every later term negligible.

If the base does not tend to the form is not indeterminate at all: a base tending to a number below with an exponent tending to gives , and a base above gives , both directly.

4. Continuity and its three failures

A function is continuous at when exists, exists, and the two are equal. Each of the three can fail separately, and the vocabulary matters because questions ask which kind of discontinuity is present.

kindwhat happensexample at
removablethe limit exists but differs from , or is undefined
jumpboth one-sided limits exist but differ$\dfrac{
infiniteat least one one-sided limit is unbounded
oscillatoryneither one-sided limit exists
removable jump infinite

Illustration 8

Find and so that is continuous everywhere, where for , , and for .

The left limit is , from the standard limit with the factor doubled. The right limit is . Continuity needs both to equal , so .

Every "find the constants" question reduces to this: compute both one-sided limits, then set them equal to the stated value at the point.

5. Differentiability and the two one-sided derivatives

The derivative at exists when

both exist and are equal. Differentiability implies continuity, because the numerator must tend to zero for a finite quotient to survive; the converse fails at every corner.

y = |x|: slopes -1 and +1 y = x|x|: both slopes 0

Illustration 9

Show that is differentiable at the origin although is not.

For , with right derivative at the origin; for , with left derivative . The two agree, so and in fact everywhere.

Multiplying by has smoothed the corner: near the origin the two branches leave with the same slope instead of with slopes . The general principle is that each extra factor of buys one more order of smoothness, which is exactly why is continuous but not differentiable at the origin while is differentiable.

A modulus wrapped around a function follows a rule worth stating on its own. Where , the sign of is fixed nearby, so is just and is differentiable exactly where is. Where , the graph of is reflected upwards, and the reflection creates a corner unless the graph arrives flat. So

That is why fails at the origin while does not: the first crosses zero with slope , the second touches zero with slope . The same rule governs a maximum of two functions, since , so the corners of a maximum sit exactly where the two graphs cross with different slopes.

Illustration 10

Where is not differentiable, and what is the minimum value of ?

Corners occur only where a modulus changes sign, so at and . Between them , constant; outside them it is , with slopes and .

So is not differentiable at exactly two points, and its minimum value is , attained on the whole interval . Reading the slopes on each piece answers both parts at once.

Illustration 11

A differentiable function satisfies for all reals, with and . Find .

Putting gives . From the definition of the derivative,

So , giving , and fixes . The whole solution came from turning the functional equation into a differential equation using nothing but the definition of the derivative.

6. The three theorems, and what they actually promise

The intermediate value theorem says a function continuous on takes every value between and . It guarantees a root but says nothing about how many or where.

Rolle's theorem says that if is continuous on , differentiable on and , then for some inside. The Lagrange mean value theorem drops the equal-endpoint condition and concludes : some tangent is parallel to the chord.

All three conclusions are existence statements. None of them locates the point, and none of them is reversible.

c a b chord tangent parallel to it the theorem gives no formula for c

Illustration 12

Show that has at most one root in , whatever the value of .

Suppose there were two roots. Rolle's theorem, applied to , would give a point in where , that is . Neither lies inside , so no such point exists and there cannot be two roots.

Rolle's theorem is used this way far more often than for its own sake: assume two roots, derive a stationary point, and show none is available.

Illustration 13

Prove that for all reals.

Apply the mean value theorem to on the interval between and : there is a with . Since , taking moduli gives the result.

Every inequality of the form "the change in is at most times the change in " is this theorem with a bound on .

Illustration 14

Show that has a solution in .

Let , which is continuous. Then and , so the intermediate value theorem provides a root strictly between. Since is increasing on , that root is unique — but uniqueness came from monotonicity, not from the theorem.

Illustration 15

If is differentiable on with everywhere, prove that is constant.

Take any . The mean value theorem gives a in with , so . Since and were arbitrary, is constant.

The result looks obvious and is not: it is exactly what the mean value theorem is for, and no argument avoiding the theorem is available at this level.

Summary

A limit exists only if both one-sided limits exist and agree, which is why any modulus, greatest-integer function or piecewise definition forces a two-sided calculation. The standard limits are stated in radians, and a question posed in degrees changes the answer by a factor of .

For forms at the origin, substitute series expansions and keep terms only to the order the denominator needs. L'Hopital's rule is available but conditional: it concludes only when the limit of the derivative ratio exists, and a failure of that ratio proves nothing about the original limit. The form is handled by , which encodes the rate at which the base approaches .

Continuity requires the value, the limit, and their equality, and the failures are named: removable, jump, infinite and oscillatory. Differentiability requires the two one-sided derivatives to exist and agree; it implies continuity and is not implied by it. A derivative need not be continuous, as shows, and each extra factor of buys one more order of smoothness at the origin.

A modulus placed around a function is differentiable at a zero only if the function arrives there flat, which is why fails and does not, and why the corners of a maximum of two graphs sit exactly at their transversal crossings.

The three theorems are existence statements. The intermediate value theorem produces a root, Rolle's theorem produces a stationary point between equal values, and the mean value theorem produces a tangent parallel to the chord. None locates its point, and the standard uses are indirect: bounding a difference, or showing that a second root would force an impossible stationary point.

Key formulas & results

Everything to memorise for the exam hall, in one card. Screenshot this for revision.

Existence of a limit
Both sides must exist and agree. Any modulus, greatest-integer function or piecewise definition forces this to be checked explicitly rather than assumed.
The standard limits
All are statements in **radians**. In degrees the first becomes $\tfrac{\pi}{180}$, which is the one place the convention is examined directly.
Squeeze theorem
The only route to a limit whose expression oscillates. It is what gives $\lim x\sin\tfrac1x=0$ and, at one order higher, the derivative of $x^{2}\sin\tfrac1x$ at the origin.
Series expansions
Keep terms only to the order the denominator demands. Faster and safer than repeated differentiation, and it makes cancellation structure visible.
L'Hopital's rule
For $\tfrac00$ and $\tfrac{\infty}{\infty}$ only, and the implication runs one way. A derivative ratio with no limit proves nothing about the original.
The $1^{\infty}$ rule
Valid when $f\to1$ and $g\to\infty$, because $\ln f\approx f-1$ then. If the base does not tend to $1$ the form is not indeterminate and can be read off directly.
Reducing other forms
Combine over a common denominator, or move a factor into the denominator as its reciprocal. For $x\to\infty$, substituting $x=\tfrac1t$ converts the problem to one at the origin.
Continuity at a point
Three separate conditions, each of which can fail on its own. Which one fails is what names the discontinuity.
Types of discontinuity
Removable when the limit exists but misses the value; jump when the two one-sided limits differ; infinite when one is unbounded; oscillatory when neither exists, as for $\sin\tfrac1x$.
Differentiability at a point
Differentiability implies continuity but not the reverse, and a derivative need not itself be continuous: $x^{2}\sin\tfrac1x$ is differentiable everywhere with $f'$ discontinuous at $0$.
Differentiability of a modulus
A crossing creates a corner, a touching does not. Since $\max(f,g)=\tfrac12\left(f+g+|f-g|\right)$, the corners of a maximum sit at the transversal crossings.
Rolle and Lagrange
Both need continuity on the closed interval and differentiability on the open one. Both are existence statements: neither locates $c$, and neither is reversible.
Intermediate value theorem
It produces a root but says nothing about how many. Uniqueness always comes from monotonicity, supplied separately.
⚠️

Traps JEE Advanced sets — and how to dodge them

These are the exact option-traps and misreads that cost marks under negative marking.

WATCH OUT
Concluding a limit does not exist because L'Hopital's rule gives an oscillating ratio
The rule concludes only when the derivative ratio has a limit. For as the ratio of derivatives oscillates, yet the original limit is .
Why it happens: The rule is taught as an equivalence rather than a one-way implication, and the failing case never appears in routine practice.
WATCH OUT
Using when the angle is in degrees
Convert to radians first. In degrees the limit is .
Why it happens: Every worked example uses radians silently, so the convention becomes invisible until a question deliberately switches it.
WATCH OUT
Reading a limit as
Apply , which captures the rate at which the base approaches .
Why it happens: The base genuinely tends to , and it is not obvious that an exponent growing without bound can undo that, so the form does not look indeterminate.
WATCH OUT
Assuming a differentiable function has a continuous derivative
Check with : it is differentiable everywhere, but has no limit at the origin.
Why it happens: Every function met before this chapter has a continuous derivative, so the two properties are never seen apart and become mentally fused.
WATCH OUT
Treating a one-sided limit as optional when a modulus is present
Split at every point where a modulus, a greatest-integer function or a piecewise rule changes, and evaluate each side separately.
Why it happens: The algebra usually simplifies to a single clean expression, which hides the fact that the simplification was only valid on one side.
WATCH OUT
Using Rolle's or Lagrange's theorem without checking the interval hypotheses
Confirm continuity on the closed interval and differentiability on the open one before applying either. A corner or a vertical tangent inside voids the conclusion.
Why it happens: The conclusions are so useful that the hypotheses get skipped, and examiners set functions with a modulus or a cube root precisely to exploit that.

Exam-pattern practice

PYQ-style questions with full solutions. Work through them as a readiness check — mark yourself honestly and get your gap report at the end.

Readiness check

Are you exam-ready for Limits, Continuity and Differentiability?

12 problems from this chapter. Try each one, reveal the worked solution, mark yourself honestly — get your gap report at the end.

12 questions~8 min worth ~12 marks in JEE Advanced exams

5-minute revision

The whole chapter, distilled. Read this the night before the exam.

  • A limit exists only when both one-sided limits exist and agree; a modulus or greatest-integer function makes the split compulsory.
  • The standard trigonometric limits are in radians; in degrees .
  • Squeeze is the only technique that handles an oscillating expression.
  • For at the origin, expand in series and keep only the orders the denominator needs.
  • L'Hopital's rule concludes only when the derivative ratio has a limit; its failure proves nothing.
  • For use ; if the base does not tend to the form is not indeterminate.
  • Convert and into a quotient before doing anything else.
  • Continuity needs the value, the limit, and their equality; which one fails names the discontinuity.
  • Differentiability implies continuity and is not implied by it, and a derivative need not be continuous.
  • Each extra factor of buys one more order of smoothness at the origin.
  • is differentiable at a zero of exactly when vanishes there; a maximum has corners at transversal crossings.
  • Rolle, Lagrange and the intermediate value theorem are existence statements; uniqueness must come from monotonicity.

JEE Advanced question blueprint

How this topic is asked, tier by tier — so you can prep to the pattern.

Typical weightage: ~2-3 questions (roughly 8-12 marks) across the two papers combined, out of the ~120 marks of Mathematics

Question styleMarks eachTypical countWhat it tests
Evaluation of limits and indeterminate forms41One-sided limits, standard limits and radian measure, series expansions, the squeeze theorem, L'Hopital's rule and its hypothesis, and the $1^{\infty}$ form
Continuity, discontinuity and differentiability41Types of discontinuity, constants making a piecewise function continuous, one-sided derivatives, moduli and maxima, and functions differentiable with a discontinuous derivative
Mean value theorems and their applications41The intermediate value theorem for existence of roots, Rolle's theorem to bound the number of roots, and the mean value theorem to establish inequalities

Exam-hall strategy

Battle-tested tips from mentors and toppers for this topic under the sectional clock.

  1. Before evaluating a limit, list the points where the expression changes definition. Those are the only places a two-sided check is needed, and the only places marks are lost.
  2. For a limit at the origin, reach for expansions first. Use L'Hopital's rule only when no expansion applies, and state the form each time you apply it.
  3. Recognise a form on sight, and write down the exponential rule before attempting any simplification.
  4. For differentiability questions, compute both one-sided derivatives explicitly rather than differentiating the two branches. A question can supply branches that agree in formula but disagree in derivative.
  5. When a question asks you to prove something exists, check whether the intermediate value theorem, Rolle's theorem or the mean value theorem applies before attempting a construction. Almost every such question is one of the three.

Beyond the exam

Where this skill shows up in the job you're competing for — and in life.

Numerical solvers rely on the intermediate value theorem:…

Numerical solvers rely on the intermediate value theorem: the bisection method works only because a continuous function that changes sign must cross zero somewhere between the two ends.

Physical models assume differentiability when they write …

Physical models assume differentiability when they write a rate of change, and the places where a real signal fails to be differentiable, such as an impact or a switch, are exactly where the model has to be replaced.

Control engineering uses the mean value theorem in the fo…

Control engineering uses the mean value theorem in the form of a bound on the derivative to guarantee that a small change in input cannot produce a large change in output, which is the formal statement of a system being well behaved.

Where else this topic is tested

Prepare once, score in every exam that asks it.

JEE Advanced
JEE Main
BITSAT
ISI Admission Test
Mathematics Olympiad (regional level)

Questions aspirants ask

Pulled from the Q&A community and mentor sessions.

Because differentiability at a point is a statement about the limit of a difference quotient there, and it constrains the derivative only at that one point. It says nothing about how the derivative behaves nearby. The example has obtained by squeezing, while for oscillates forever as . The function is differentiable everywhere and its derivative is discontinuous at exactly one point.

Whenever the limit is at the origin and would need the rule more than once, and always when the numerator looks constructed to cancel leading terms. Repeated differentiation multiplies the chances of an algebraic slip and requires re-checking the indeterminate form each time. Expansions also reveal why an answer is what it is: because is the coefficient of in the sine series.

Look for anything whose definition changes sign or branch at the point: a modulus, a greatest-integer or fractional-part function, a piecewise rule, an odd root, or an exponent whose base crosses . Away from such features the two sides agree automatically. In practice it is quicker to write down the list of such points first and then evaluate both sides only there.

No, and that is a feature rather than a limitation. Its whole use is that some such point exists without your having to find it, which is what makes it prove inequalities: follows from without knowing . When a question does ask for it is asking you to solve directly, which is a separate calculation.

Continuity alone is enough, and that is exactly why the theorem is stated separately from the other two. It applies to functions with corners, such as , where Rolle's theorem does not. The trade-off is that it gives only the existence of a value, not any information about slopes, so a question needing a stationary point or a bound on a difference requires one of the differentiability-based theorems instead.

Sources and How This Chapter Was CheckedSyllabus scope, what was derived rather than quoted, and how every answer here was checked.

Scope follows the JEE Advanced syllabus for 2026 (Mathematics, Limits, Continuity and Differentiability): the limit and continuity of a function, limits and continuity of sums, differences, products and quotients, L'Hopital's rule, the derivative of a function, the derivative of the sum, difference, product and quotient of two functions, chain rule, derivatives of standard functions, and the mean value theorem including Rolle's theorem.

The treatment concentrates on what Advanced adds to Main. Main asks for the limit of a rational or trigonometric expression and for the continuity of a piecewise function; Advanced asks for a limit whose numerator is built to cancel the leading terms of a series, for the type of a discontinuity, for a function that is differentiable with a discontinuous derivative, and for an inequality established by the mean value theorem.

Results were derived rather than quoted. The derivative of at the origin came from the definition together with the squeeze theorem, the degree-measure limit from converting to radians, the rule from writing the expression as an exponential and expanding the logarithm, and the constancy of a function with zero derivative from the mean value theorem.

Every illustration was checked a second way. The limit of was obtained both by expansion and by three applications of L'Hopital's rule; the constants in Illustration 8 were verified by evaluating both one-sided limits independently; the derivative of was confirmed by differentiating each branch separately; and the root in Illustration 14 was checked against the monotonicity of the same function.

The illustrations are teaching problems written for this chapter, not previous-year questions, and are not labelled as such.

Header Logo