By the end of this chapter you'll be able to…

  • 1Compute dipole moments as vector sums including the lone-pair contribution, and explain reversals such as against
  • 2Apply Fajans' rules, including the pseudo noble gas cation effect, to predict covalent character and its physical consequences
  • 3Predict shapes by VSEPR with correct lone-pair placement, and use Bent's rule to account for bond-angle anomalies
  • 4Build molecular orbital diagrams with the correct - mixing order, and obtain bond order, bond length and magnetism
  • 5Use isoelectronic reasoning across , , and , and explain ionisation that strengthens a bond
  • 6Explain back bonding in boron and silicon compounds, and distinguish intramolecular from intermolecular hydrogen bonding
💡
Why this chapter matters in JEE Advanced
Bonding is the chapter that decides how well the rest of inorganic and physical chemistry goes, and Advanced examines it through comparisons rather than definitions. Two molecules that look alike are put side by side and you are asked which has the larger dipole moment, the shorter bond, the higher boiling point, or the greater Lewis acidity. Answering needs a small set of tools that Main does not supply: the dipole as a vector sum that includes the lone pair, Fajans' rules with the pseudo noble gas effect, Bent's rule for bond angles, the s-p mixing that reorders the molecular orbital diagram before oxygen, back bonding, and the difference between hydrogen bonding within a molecule and between molecules. Each tool answers a whole family of questions, and several of them reverse the prediction a naive electronegativity argument would give.

Before you start — revise these

🔗
Lewis structures, octet rule and its exceptions
🔗
Hybridisation of , and orbitals
🔗
Electronegativity and its periodic trends
🔗
Electronic configurations and orbital energy ordering

Chemical Bonding and Molecular Structure

Both and are trigonal pyramidal with a lone pair on nitrogen. Fluorine is far more electronegative than hydrogen, so should have the larger dipole moment. Does it?

The opposite. measures D; manages only D.

The lone pair carries a dipole moment of its own, pointing away from the nitrogen. In ammonia the three bond moments also point towards nitrogen, so bond moments and lone-pair moment reinforce. In the bond moments point away from nitrogen towards fluorine, directly opposing the lone pair, and the two nearly cancel.

N lone pair NH3: all add, 1.47 D N lone pair NF3: they oppose, 0.24 D

Advanced bonding questions are almost always of this kind. Two molecules that look alike behave differently, and the reason is a vector, an orbital mixing, or a lone pair that a first-pass analysis ignored.

1. Dipole moments as vector sums

Symmetry does most of the work. Any molecule whose bond vectors sum to zero is non-polar however polar its individual bonds are: , , , , are all zero. Adding a lone pair breaks that symmetry, which is why is polar and is not.

For two identical bonds at angle ,

Illustration 1

has a bond angle of and a dipole moment of D. Estimate the bond moment, ignoring the lone pairs.

D

The true bond moment is smaller than this, because the two lone pairs contribute a moment in the same direction as the resultant. Ignoring them always overestimates the bond contribution.

Illustration 2

Explain why is non-polar while has a dipole moment of D, despite both being triatomic.

is linear, so the two moments are equal and opposite and cancel exactly.

has a lone pair on sulphur, making it bent at about . The two bond moments no longer cancel, and the lone-pair moment adds to the resultant.

The presence or absence of a lone pair is the whole difference. Counting electron domains before predicting polarity is not optional.

2. Fajans' rules: how covalent is an ionic bond?

No bond is purely ionic. A cation polarises the anion's electron cloud, pulling density into the internuclear region, and the degree of that distortion is covalent character. Four factors increase it:

FactorEffect
Small cationhigh charge density, strong polariser
Large anionloosely held cloud, easily polarised
High charge on either ionstronger interaction
Cation with a pseudo noble gas configuration ()poor screening, strong polarisation

The fourth is the one Advanced tests. and have nearly the same radius, yet is far more covalent than , because the shell shields the nuclear charge poorly.

Illustration 3

Arrange , , and in order of increasing covalent character, and predict which has the lowest melting point.

Smaller cation and larger anion both raise covalent character.

has the smallest cation with the largest anion and is the most covalent, so it has the lowest melting point and the greatest solubility in organic solvents.

Covalent character shows up as low melting point, volatility and solubility in non-polar solvents — three observable consequences of one structural idea.

3. VSEPR, and where Bent's rule takes over

The domain count gives the geometry; lone pairs then compress the bond angles, because a lone pair occupies more angular space than a bonding pair:

So methane is , ammonia and water — one and then two lone pairs squeezing the same tetrahedral arrangement.

Bent's rule goes further and explains cases VSEPR cannot:

More electronegative substituents prefer the hybrid orbital with less character.

Since character is concentrated near the nucleus and electronegative atoms pull electron density away anyway, the atom saves its valuable character for lone pairs and for bonds to less electronegative partners. This predicts that () has a smaller angle than (), and that in the fluorines occupy the axial positions, which have more character.

Illustration 4

Predict the shapes of , , and , giving the electron and molecular geometries.

: domains ( bonds, lone pairs), trigonal bipyramidal electron geometry, linear shape with lone pairs equatorial.

: domains ( bonds, lone pairs), octahedral electron geometry, square planar.

: domains ( bonds, lone pairs), T-shaped.

: domains ( bonds, lone pair), see-saw.

Lone pairs always take equatorial positions in a trigonal bipyramid, because an equatorial site has only two neighbours at against three for an axial site.

Illustration 5

Both () and () have bond angles far below tetrahedral. Explain why, and say what Bent's rule alone would predict for the comparison between them.

Both angles are far below because phosphorus uses nearly pure orbitals for bonding, keeping its character in the lone pair — a general feature of period 3 and below.

Bent's rule alone would predict the fluoride to have the narrower angle, since fluorine is more electronegative and should demand orbitals of higher character. The observed angle is in fact slightly wider, because repulsion between the three bulky fluorine atoms opposes that effect and wins.

Bent's rule gives the direction of an effect, not always its magnitude. Where two effects oppose, the observed value settles which won.

4. Molecular orbital theory, and the s-p mixing inversion

Bond order and magnetism come straight from filling a molecular orbital diagram:

The critical detail is that the ordering of the and levels changes at oxygen.

up to N2: pi below sigma sigma* 2p pi* 2p sigma 2p pi 2p sigma 2s O2 onward: sigma below pi sigma* 2p pi* 2p pi 2p sigma 2p sigma 2s s-p mixing is strong for light atoms and pushes sigma 2p above the pi pair

For , and the and orbitals are close enough in energy to mix, which pushes above the degenerate pair. From onward the - gap has widened, mixing is negligible, and the normal order resumes.

The payoff is immediate. has two electrons in the degenerate pair and is therefore paramagnetic; fills that pair and is diamagnetic with a bond order of made of two bonds and no . Neither result is obtainable from valence bond theory.

Illustration 6

Compute the bond orders and predict the magnetism of , , and .

has valence electrons: , , bond order , with two unpaired electrons in paramagnetic.

: one electron removed, bond order , one unpaired, paramagnetic.

: one added, bond order , one unpaired, paramagnetic.

: two added, bond order , diamagnetic.

Bond length runs the other way: , since higher bond order always means shorter and stronger.

Illustration 7

Explain why has a first ionisation energy of eV while has only eV, even though a nitrogen atom is harder to ionise than an oxygen atom.

In the highest occupied orbital is the bonding , pushed up by - mixing but still a bonding orbital.

In the highest occupied orbital is an antibonding , which lies well above it.

Removing an electron from an antibonding orbital is easier, and it even strengthens the bond, which is why is shorter than .

The molecular property inverts the atomic one. This is one of the cleanest demonstrations that molecular orbitals, not atomic ones, are what a molecule actually has.

5. Heteronuclear molecules and isoelectronic reasoning

For a heteronuclear pair, the more electronegative atom's orbitals lie lower, so bonding orbitals resemble it more and antibonding orbitals resemble the other. Bond order counting is otherwise unchanged.

Isoelectronic species share bond orders. , , and all have electrons and a bond order of . has and a bond order of with one unpaired electron — which is why it dimerises at low temperature and why removing that electron to give shortens the bond.

Illustration 8

has a bond length of pm and of pm. Explain.

has valence electrons, the last of which occupies a orbital, giving bond order .

Removing it gives with electrons and bond order , isoelectronic with .

Losing an antibonding electron strengthens and shortens the bond by pm.

This is the standard test of whether a student is counting antibonding electrons. Ionisation normally weakens a bond; here it does the reverse.

6. Back bonding

When an atom with a lone pair sits next to an atom with an empty orbital, the pair can be donated sideways into that vacancy, adding partial multiple-bond character.

B F F F lone pair into empty 2p BF3: shorter B-F bonds, weaker Lewis acid than BCl3 N SiH3 SiH3 SiH3 trisilylamine: PLANAR, unlike pyramidal trimethylamine

Three standard cases:

. Each fluorine donates a lone pair into boron's empty , giving partial double-bond character. The bond is shorter than a single bond, and is a weaker Lewis acid than , because the back bonding it enjoys must be given up to accept a pair.

Trisilylamine, , is planar. Nitrogen donates its lone pair into silicon's empty orbitals, so it rehybridises to . Trimethylamine, with no such acceptor, stays pyramidal.

Siloxanes. The angle is about , far wider than the of , for the same reason.

Illustration 9

Arrange , and in order of increasing Lewis acidity, and explain.

Back bonding requires good orbital overlap, which needs similar orbital sizes. Boron's overlaps well with fluorine's , poorly with chlorine's and worse with bromine's .

therefore has the most back bonding and is the most reluctant to accept a lone pair.

This inverts the electronegativity prediction, which would make the strongest acid. The overlap argument beats the inductive one, and knowing which wins is the point of the question.

7. Hydrogen bonding: within or between

An atom attached to , or carries enough positive charge to be attracted to a lone pair on another such atom. Whether the bond forms within a molecule or between molecules changes the physical properties completely.

OH NO2 ortho: INTRAmolecular bp 214 C, steam volatile OH NO2 para: INTERmolecular chain bp 279 C

Intramolecular hydrogen bonding uses up the donor and acceptor within one molecule, so it lowers boiling point and solubility in water. Intermolecular bonding links molecules together and raises both.

Hence -nitrophenol boils at C and is steam-volatile, while -nitrophenol boils at C. The same logic explains why boils at C against 's C, and why ice is less dense than water.

Illustration 10

Explain why -nitrophenol can be separated from -nitrophenol by steam distillation.

The ortho isomer forms a six-membered internal hydrogen bond between the hydroxyl hydrogen and a nitro oxygen, so it cannot hydrogen bond to its neighbours or to water.

It is therefore more volatile and less water-soluble, and distils over with the steam.

The para isomer cannot reach its own nitro group, so it hydrogen bonds intermolecularly, has a much higher boiling point, and remains behind.

Geometry, not the functional groups, decides the outcome. Both isomers contain identical groups in identical numbers.

8. Resonance, formal charge and lattice energy

Resonance structures are contributors to one real structure, not species in equilibrium. The most important contributors have: complete octets, minimum formal charge separation, and negative formal charge on the more electronegative atom.

where is the valence electron count, the lone-pair electrons and the bonding electrons.

For ionic solids the lattice enthalpy dominates stability:

and a Born-Haber cycle relates it to measurable quantities: sublimation, ionisation, dissociation, electron gain and formation enthalpies.

Illustration 11

Compute formal charges on each atom in the two resonance forms of with expanded octets and with a dative bond, and say which contributes more.

With one double and one dative single bond: sulphur is ; the doubly bonded oxygen is ; the dative oxygen is .

With two double bonds and an expanded octet: all three atoms have formal charge zero.

The expanded-octet form contributes more, because it has no charge separation.

Sulphur is a third-period element with accessible orbitals, so octet expansion is permitted. The same argument would be invalid for ozone, where the charge-separated form is the only option.

Illustration 12

Explain why (C) melts far higher than (C), despite similar ionic radii.

Lattice enthalpy is proportional to the product of the ionic charges.

pairs with , giving a product of .

pairs with , a product of .

The fourfold increase in the electrostatic term dominates the small difference in interionic distance.

Charge matters far more than size in lattice energy, because it enters as a product while radius enters only as a sum in the denominator.

Summary

  • Dipole moment is a vector sum including the lone pair: is D but only D, because in the two contributions oppose.
  • for two identical bonds; symmetry makes , , and non-polar.
  • Fajans: small cation, large anion, high charge and a pseudo noble gas () cation all raise covalent character.
  • is far more covalent than at almost identical cation size, because shields poorly.
  • VSEPR: lone-lone lone-bond bond-bond repulsion; lone pairs always go equatorial in a trigonal bipyramid.
  • Bent's rule: electronegative substituents take the orbitals with less character, which is why has a narrower angle than .
  • Bond order ; - mixing puts above up to , and below it from on.
  • is paramagnetic with bond order ; the series runs .
  • ionises harder than because its top electron is bonding while oxygen's is antibonding.
  • Isoelectronic species share bond order: , , and all have electrons and bond order .
  • Back bonding shortens , makes the weakest boron Lewis acid, and flattens trisilylamine to planar.
  • Intramolecular hydrogen bonding lowers boiling point and water solubility; intermolecular raises both — hence steam distillation of -nitrophenol.
  • Best resonance contributors have full octets and least charge separation; lattice enthalpy , with charge dominating.

Key formulas & results

Everything to memorise for the exam hall, in one card. Screenshot this for revision.

Dipole moment as a vector sum
The **lone-pair term is what students omit**. In $\text{NH}_3$ it adds to the bond moments ($1.47$ D); in $\text{NF}_3$ it opposes them ($0.24$ D).
Symmetry and polarity
Polar bonds do not make a polar molecule. Adding a lone pair breaks the symmetry, which is why $\text{SO}_2$ is polar and $\text{CO}_2$ is not.
Fajans' rules
The fourth factor is the tested one: $\text{Cu}^+$ and $\text{Na}^+$ are the same size, yet $\text{CuCl}$ is far more covalent because $3d^{10}$ screens poorly.
VSEPR repulsion order
Gives $109.5^{\circ}$, $107^{\circ}$, $104.5^{\circ}$ for methane, ammonia and water. Lone pairs always take **equatorial** sites in a trigonal bipyramid.
Bent's rule
The atom keeps its $s$ character for lone pairs and for bonds to less electronegative partners. Predicts $\text{OF}_2$ narrower than $\text{H}_2\text{O}$ and fluorines axial in $\text{PF}_3\text{Cl}_2$.
Bond order
Higher bond order always means **shorter and stronger**. Bond length and bond order run in opposite directions without exception.
The s-p mixing inversion
Mixing is strong for light atoms where $2s$ and $2p$ are close. It is what makes $\text{B}_2$ paramagnetic and $\text{C}_2$ a purely $\pi$ double bond.
The oxygen series
$\text{O}_2$ is **paramagnetic** with two unpaired $\pi^{*}$ electrons — the single result valence bond theory cannot produce.
Ionisation from an antibonding orbital
Nitrogen's top electron is **bonding**, oxygen's is **antibonding**. Removing oxygen's even shortens the bond, which inverts the atomic ordering.
Isoelectronic species
Counting valence electrons is faster than drawing a diagram. $\text{NO}$ is paramagnetic and shortens on ionisation, from $115$ to $106$ pm.
Back bonding
Overlap needs matched orbital sizes, so $2p$-$2p$ in $\text{BF}_3$ is best and its acidity lowest. **This inverts the electronegativity prediction.**
Hydrogen bonding: intra versus inter
$o$-nitrophenol boils at $214^{\circ}$C and is steam-volatile; $p$-nitrophenol at $279^{\circ}$C. Identical groups, different geometry.
Formal charge and lattice enthalpy
Best resonance contributors have full octets and least charge separation. Charge dominates lattice energy because it enters as a **product**, radius only as a sum.
⚠️

Traps JEE Advanced sets — and how to dodge them

These are the exact option-traps and misreads that cost marks under negative marking.

WATCH OUT
Omitting the lone-pair contribution when comparing dipole moments
Add the lone-pair vector explicitly. It reinforces the bond moments in and opposes them in , which reverses the expected ordering.
Why it happens: Dipole moment is introduced through bond polarity alone, and lone pairs are invisible in a structural formula drawn without them.
WATCH OUT
Predicting to be the strongest boron Lewis acid because fluorine is most electronegative
Back bonding is best when orbital sizes match, so is the most stabilised and therefore the weakest acid. The order is .
Why it happens: The inductive argument is simpler and is usually the first one taught, so it wins by default unless back bonding is specifically considered.
WATCH OUT
Using the same molecular orbital ordering for and
Up to nitrogen the pair lies below ; from oxygen onward the order reverses. Check which side of the boundary the molecule is on first.
Why it happens: Diagrams are often printed once and reused, and the reason for the change — - mixing weakening as the gap widens — is easy to skip.
WATCH OUT
Assuming ionisation always weakens a bond
If the electron comes from an antibonding orbital the bond strengthens. and are both shorter than their neutral parents.
Why it happens: For atoms and for most molecules ionisation is destabilising, so the exception has to be spotted from the orbital the electron actually occupies.
WATCH OUT
Treating intramolecular hydrogen bonding as just a weaker version of intermolecular
They have opposite effects. An internal bond consumes the donor and acceptor, lowering boiling point and water solubility instead of raising them.
Why it happens: Both are called hydrogen bonding and both are stabilising, so it is natural to expect them to influence physical properties in the same direction.
WATCH OUT
Placing lone pairs axially in a trigonal bipyramidal arrangement
Lone pairs go equatorial, where they have only two neighbours at rather than three. This gives its linear shape and its T shape.
Why it happens: Axial positions look less crowded on a two-dimensional drawing, whereas the ninety-degree neighbour count is what actually matters.

Exam-pattern practice

PYQ-style questions with full solutions. Work through them as a readiness check — mark yourself honestly and get your gap report at the end.

Readiness check

Are you exam-ready for Chemical Bonding and Molecular Structure?

12 problems from this chapter. Try each one, reveal the worked solution, mark yourself honestly — get your gap report at the end.

12 questions~8 min worth ~12 marks in JEE Advanced exams

5-minute revision

The whole chapter, distilled. Read this the night before the exam.

  • Dipole moment includes the lone pair: is D, only D because the contributions oppose.
  • ; symmetric molecules are non-polar however polar their bonds.
  • Fajans: small cation, large anion, high charge, pseudo noble gas cation all raise covalent character.
  • Lone-lone lone-bond bond-bond repulsion; lone pairs go equatorial in a trigonal bipyramid.
  • Bent's rule: electronegative substituents take the orbitals with less character.
  • Heavy central atoms hybridise poorly, so and sit near with nearly pure bonding.
  • ; higher bond order always means shorter and stronger.
  • - mixing puts below up to , and the reverse from on.
  • is paramagnetic (BO ); the series runs for .
  • ionises harder than : bonding versus antibonding top electron. is shorter than .
  • Back bonding: is the weakest boron Lewis acid; trisilylamine is planar and a very weak base.
  • Intramolecular H-bonding lowers bp and solubility; , with charge dominating.

JEE Advanced question blueprint

How this topic is asked, tier by tier — so you can prep to the pattern.

Typical weightage: ~2-3 questions (roughly 8-12 marks) across the two papers combined, of the ~120 marks of Chemistry

Question styleMarks eachTypical countWhat it tests
Polarity, dipole moments and ionic character31Vector addition including lone pairs, symmetry and polarity, and Fajans' rules with the pseudo noble gas effect
VSEPR, hybridisation and Bent's rule31Shapes with lone pairs, equatorial placement in trigonal bipyramids, bond-angle anomalies and substituent positioning
Molecular orbital theory and bond order41The $s$-$p$ mixing inversion, bond orders and magnetism across series, isoelectronic reasoning and antibonding ionisation
Back bonding, hydrogen bonding and lattice energy41Back bonding in boron and silicon compounds, intramolecular versus intermolecular hydrogen bonding, resonance and lattice enthalpy

Exam-hall strategy

Battle-tested tips from mentors and toppers for this topic under the sectional clock.

  1. For any dipole moment comparison, draw the lone pairs explicitly before adding vectors. Half the questions in this area turn on a lone-pair contribution being forgotten.
  2. Before drawing a molecular orbital diagram, check whether the molecule lies before or after oxygen in the period. Using the wrong ordering changes both magnetism and ionisation predictions.
  3. For any species related by adding or removing electrons, count valence electrons and identify whether the orbital involved is bonding or antibonding. That one step answers bond length, bond order and magnetism together.
  4. If a question compares boron or silicon compounds, suspect back bonding, and remember it usually reverses the answer a simple electronegativity argument would give.
  5. When comparing boiling points of isomers, check whether an internal hydrogen bond is geometrically possible. If it is, that isomer will be the more volatile one.

Beyond the exam

Where this skill shows up in the job you're competing for — and in life.

Silicone polymers owe their flexibility and thermal stabi…

Silicone polymers owe their flexibility and thermal stability to the wide silicon-oxygen-silicon angle produced by back bonding, which is why they remain rubbery across a far greater temperature range than carbon analogues.

Steam distillation separates ortho from para isomers of s…

Steam distillation separates ortho from para isomers of substituted phenols industrially, exploiting the volatility difference that intramolecular hydrogen bonding creates.

Magnetic oxygen separation

Magnetic oxygen separation, used in some medical concentrators, works because oxygen is one of the few common gases that is paramagnetic, a fact only molecular orbital theory predicts.

Where else this topic is tested

Prepare once, score in every exam that asks it.

JEE Advanced
JEE Main
BITSAT
NEET UG
State engineering entrance tests

Questions aspirants ask

Pulled from the Q&A community and mentor sessions.

Because the lone pair on nitrogen contributes a dipole of its own, and in the two molecules it points in opposite directions relative to the bond dipoles. In ammonia the bonds are polarised towards nitrogen, so the bond moments point the same way as the lone-pair moment and everything adds. In nitrogen trifluoride the bonds are polarised away from nitrogen towards the fluorines, so the bond moments oppose the lone pair and the two contributions largely cancel. The measured values, one and a half debye against a quarter of a debye, show how nearly complete that cancellation is.

Because of back bonding. Each fluorine has lone pairs in two-p orbitals that overlap well with boron's empty two-p orbital, so electron density is already being donated into the vacant site and the molecule is partly stabilised. Accepting a lone pair from a base would require giving that stabilisation up. Bromine's lone pairs are in four-p orbitals, which overlap poorly with boron's two-p, so almost no back bonding occurs and the vacancy is genuinely empty. The overlap argument overturns the electronegativity argument, which would have predicted the opposite order.

Because of mixing between the two-s and two-p sigma orbitals. For light atoms these two are close in energy, so they interact, pushing the sigma level derived from two-p above the pi pair. As nuclear charge increases across the period the two-s orbital is stabilised much more than two-p, the energy gap widens, and the mixing becomes negligible. By oxygen the interaction is weak enough that the normal ordering, with sigma below pi, is restored. This is why boron and carbon molecules behave in ways that look anomalous until the mixing is taken into account.

If the electron was in an antibonding orbital. Antibonding electrons cancel part of the stabilisation provided by the bonding ones, so taking one away raises the bond order rather than lowering it. Oxygen has two electrons in antibonding pi orbitals, so the oxygen cation has a bond order of two and a half rather than two and is measurably shorter. Nitric oxide behaves the same way, shortening from one hundred and fifteen picometres to one hundred and six on ionisation. For nitrogen, whose highest occupied orbital is bonding, ionisation weakens the bond as expected.

Because it uses up the very groups that would otherwise link one molecule to the next. In ortho-nitrophenol the hydroxyl hydrogen reaches an oxygen of the neighbouring nitro group and forms a stable six-membered ring within the molecule. That hydrogen is then unavailable to bond to another molecule, so the intermolecular forces are only weak dispersion and dipole interactions. The para isomer cannot reach its own nitro group, so it bonds to its neighbours instead and forms extended chains, which require far more energy to break.
Sources and How This Chapter Was CheckedSyllabus scope, what was derived rather than quoted, and how every answer here was checked.

Scope follows the JEE Advanced syllabus for 2026 (Chemistry, Chemical bonding and molecular structure): the orbital overlap and covalent bond, hybridisation involving , and orbitals, orbital energy diagrams for homonuclear diatomic species, and hydrogen bonding.

It also covers polarity in molecules and dipole moments, together with VSEPR and the qualitative geometrical shapes of simple molecules, and the ionic bond with lattice energy and its consequences.

The treatment concentrates on what Advanced adds to Main: dipole moments as vector sums including the lone pair, Fajans' rules with the pseudo noble gas effect, Bent's rule, the - mixing inversion in the molecular orbital ordering, back bonding, and the distinction between intramolecular and intermolecular hydrogen bonding.

Results were derived rather than quoted. The bond moment of water was obtained from the vector sum and the measured angle; bond orders from filling the appropriate molecular orbital diagram; formal charges from the standard counting expression; and the lattice enthalpy comparison from the charge product in the electrostatic term.

Every illustration was checked against a second route or a limiting case. The oxygen series bond orders were verified against the known bond-length ordering; the boron trihalide acidity order was tested against the opposing electronegativity prediction to identify which effect dominates; and the nitrogen and oxygen ionisation comparison was checked against the atomic values it inverts.

The illustrations are teaching problems written for this chapter, not previous-year questions, and are not labelled as such.

Header Logo