By the end of this chapter you'll be able to…

  • 1Identify arithmetic (constant difference) and geometric (constant ratio) series on sight
  • 2Recognise a combined-operation series and an alternating two-operation series
  • 3Identify a formula-based series (e.g. n^2+2n, n^3+1) from a pattern in its consecutive differences
  • 4Extend a second-order series by finding the pattern within its own differences
  • 5Test a complete sequence systematically against a hypothesised rule to find the wrong term
💡
Why this chapter matters in IBPS Clerk
Both missing-term and wrong-term questions reward the same single skill — identifying the underlying rule quickly — and once spotted, extending or checking the sequence takes only seconds. The entire difficulty is pattern recognition, not calculation.

Before you start — revise these

🔗
Squares, cubes and basic number facts
Recognising n^2, n^3 and small perfect powers on sight speeds up identifying formula-based series.

Number Series — Missing & Wrong Term — IBPS Clerk / SBI Clerk

Number series questions come in two closely related forms. A missing-term series gives most of a sequence and asks for the next (or a specific missing) term once the underlying rule is identified; a wrong-term series gives a COMPLETE sequence and asks which single term breaks an otherwise-consistent rule. Both demand the identical first step — find the rule — before either extending the sequence or checking every term against it.

1. Constant-difference and constant-ratio series

The two most basic series types are arithmetic (a constant amount added each step) and geometric (a constant ratio multiplied each step) — checking the difference between consecutive terms first, then the ratio if the difference isn't constant, identifies which type a series is. These resolve fastest since the rule, once spotted, requires no further searching.

2. Combined operation series

A combined-operation series applies a fixed formula each step, such as "double and add 1," rather than a single addition or multiplication. follows throughout: , , , and so on.

3. Alternating-operation series

An alternating series applies TWO different operations in a repeating cycle, rather than one fixed operation every step — recognising the cycle length (usually 2 or 3 steps) is the key to extending it correctly. alternates then : , , , , and the cycle continues.

4. Formula-based series (squares, cubes, and their variants)

A formula-based series follows for , where is a specific formula like or . Recognising a series as formula-based, rather than a step-by-step operation, usually requires noticing that consecutive DIFFERENCES themselves follow a recognisable pattern, like consecutive odd numbers or squares.

The series follows ; its consecutive differences are — the odd numbers — which is the clue that reveals the underlying quadratic formula.

5. Second-order (difference-of-differences) series

When a series' own differences are not constant but form a RECOGNISABLE pattern themselves (their own arithmetic or geometric sequence), the series is second-order — extend the pattern of differences first, then add that next difference to the series' last term. has differences (perfect squares); the next difference is , giving the next series term as .

6. Wrong-term series: checking every term against the rule

A wrong-term question gives a complete sequence and requires testing EVERY term against a hypothesised rule — the moment one term fails to fit while the rest are consistent, that term is the wrong one, and its correct value can be derived by extending the true rule. Given , checking against () shows every term matches except the fifth, which should be 35, not 36 — making 36 the wrong term.

Worked Examples

Example 1. Find the next term:

Each term follows "double and add 1": .

Answer: 159.

Example 2. Find the next term:

The series alternates then : after , the next operation is : .

Answer: 68.

Example 3. Find the next term:

Each term follows for : , , , , . The next term uses : .

Answer: 217.

Example 4. Find the next term:

The differences are — perfect squares. The next difference is : .

Answer: 57.

Example 5. Identify the wrong term: .

Testing against : the correct sequence is . The given sequence has in place of .

Answer: 36 is the wrong term (should be 35).

Example 6. Identify the wrong term: .

Testing the pattern "triple and subtract 2": , , , . The given sequence has in place of .

Answer: 83 is the wrong term (should be 82).

Example 7. Find the next term:

Each term is the sum of the two preceding terms (a Fibonacci-type series): .

Answer: 55.

Summary

Missing-term and wrong-term questions both start with the identical step: identify the underlying rule. A missing-term question then extends the sequence using that rule; a wrong-term question checks every term against it to find the one that breaks the pattern.

Check constant difference (arithmetic) and constant ratio (geometric) first, since they resolve fastest. If neither fits, look for a fixed combined operation, an alternating cycle of two operations, or a formula like or — a formula-based series is often revealed by its own differences following a recognisable pattern (consecutive odd numbers, squares, and so on).

A second-order series has differences that are not themselves constant but form their own recognisable sequence — extend that inner pattern first, then add the result to the series' last term.

For wrong-term questions, test the hypothesised rule against every term systematically; the single term that breaks an otherwise-consistent pattern is the answer, and the true rule reveals its correct value.

Key formulas & results

Everything to memorise for the exam hall, in one card. Screenshot this for revision.

Arithmetic series
A constant difference d added each step.
Geometric series
A constant ratio r multiplied each step.
Second-order series
Then add the extended difference to the series' last term.
Wrong-term test
The true rule then gives that term's correct value.
⚠️

Traps IBPS Clerk sets — and how to dodge them

These are the exact option-traps and misreads that cost marks under negative marking.

WATCH OUT
Assuming every series is arithmetic without checking the ratio when the difference isn't constant
If the difference between consecutive terms isn't constant, check the ratio next, then a combined operation, before assuming a more complex formula.
Why it happens: Checking simpler rule types first (difference, then ratio) is faster than jumping straight to a complex formula hypothesis.
WATCH OUT
Missing an alternating-operation pattern by only checking a single fixed operation
If no single operation fits every step, check whether TWO operations alternate in a repeating cycle.
Why it happens: Alternating series are common at this level and are missed entirely by testing only one operation type.
WATCH OUT
In a wrong-term question, stopping as soon as one term seems to fit a guessed rule, without checking the rest
Test the hypothesised rule against EVERY term in the sequence before concluding which one is wrong.
Why it happens: A rule that happens to fit the first few terms by coincidence can still be the wrong rule; only checking every term confirms it.
WATCH OUT
Trying to find a formula directly instead of examining the series' own differences first
Compute the differences between consecutive terms — if they form a recognisable pattern (squares, cubes, odd numbers), that reveals the underlying formula.
Why it happens: Differences often expose a simpler underlying pattern than trying to guess a formula for the original series directly.

Exam-pattern practice

PYQ-style questions with full solutions. Work through them as a readiness check — mark yourself honestly and get your gap report at the end.

Readiness check

Are you exam-ready for Number Series — Missing & Wrong Term?

8 problems from this chapter. Try each one, reveal the worked solution, mark yourself honestly — get your gap report at the end.

8 questions~6 min

5-minute revision

The whole chapter, distilled. Read this the night before the exam.

  • Check constant difference (arithmetic) first, then constant ratio (geometric) — they resolve fastest when they fit.
  • A combined-operation series applies one fixed formula every step (e.g. double and add 1); an alternating series cycles between two different operations.
  • A formula-based series (n^2+2n, n^3+1, etc.) is often revealed by its own differences following a recognisable pattern — squares, cubes or odd numbers.
  • A second-order series has non-constant differences that themselves form a recognisable pattern — extend that inner pattern first, then add to the series' last term.
  • For wrong-term questions, test the hypothesised rule against every term before concluding which single one breaks it.

IBPS Clerk question blueprint

How this topic is asked, tier by tier — so you can prep to the pattern.

Typical weightage: Number Series contributes an estimated 4-6 of the Numerical Ability section's questions

Question styleMarks eachTypical countWhat it tests
Missing term — constant difference/ratio3~1-2Identifying arithmetic or geometric series
Missing term — combined operation5~1Identifying a single fixed combined operation applied each step
Missing term — alternating operation5~1Identifying a repeating two-operation cycle
Missing term — formula-based4~1Identifying a formula-based series via its differences
Missing term — second order5~1Extending a series whose differences form their own pattern
Wrong term6~1-2Testing every term against a hypothesised rule to find the outlier
Prep strategy
  • Day 1: arithmetic, geometric and combined-operation series, drilling the difference-then-ratio-then-operation check order.
  • Day 2: alternating-operation and formula-based/second-order series.
  • Day 3: wrong-term questions and mixed timed practice across all types.

Exam-hall strategy

Battle-tested tips from mentors and toppers for this topic under the sectional clock.

  1. Check difference, then ratio, then a combined operation, then an alternating cycle, in that fixed order, before considering a complex formula.
  2. For formula-based series, compute the differences between terms immediately — a recognisable pattern there is usually the fastest route to the rule.
  3. For wrong-term questions, never stop testing after the rule fits the first 2-3 terms — check all of them.
  4. If stuck after 20-30 seconds, move on and return later — number series rewards fast pattern recognition, and dwelling on one question costs time better spent elsewhere.

Beyond the exam

Where this skill shows up in the job you're competing for — and in life.

Pattern recognition in data

Identifying whether a trend in real data (sales, costs, growth figures) is additive, multiplicative, or follows a more complex pattern is the same skill trained here.

Where else this topic is tested

Prepare once, score in every exam that asks it.

IBPS PO / SBI PO Quantitative AptitudeHigh — the identical missing/wrong-term series skill, tested within a broader syllabus
SSC CGL Quantitative AptitudeModerate — overlapping series-pattern recognition
CUET UG Quantitative ReasoningModerate — shares triangular/geometric pattern recognition at a simpler level

Questions aspirants ask

Pulled from the Q&A community and mentor sessions.

Roughly 4-6 of the section's 35-40 questions, based on pattern analysis of the exam's topic weightage.

Check constant difference first, then constant ratio. If neither fits, compute the differences between consecutive terms — a recognisable pattern in those differences (squares, cubes, odd numbers) usually reveals the underlying rule fastest.

A missing-term question gives most of the sequence and asks for the next value once the rule is found. A wrong-term question gives a COMPLETE sequence and asks which single term breaks an otherwise-consistent rule — every term must be tested, not just extended from.

Check for an alternating two-operation cycle before assuming a more complex formula — alternating series are a common pattern type that is easy to miss if only a single fixed operation is tested.
Header Logo