By the end of this chapter you'll be able to…

  • 1Work in radians, apply the sign conventions by quadrant, and use the even and odd properties of the ratios
  • 2Derive rather than memorise the multiple and sub-multiple angle formulas from the compound-angle ones
  • 3Convert between sums and products, and use the conversion to factorise an otherwise unsolvable equation
  • 4Find the range of a sine plus b cosine and use it for maxima and minima
  • 5Write general solutions for the three basic equations, reject impossible roots, and check for roots manufactured by squaring
  • 6State the principal branch of each inverse function and use it to simplify nested expressions and to apply the addition formulas with their conditions
💡
Why this chapter matters in JEE Main
Simplify the inverse sine of the sine of 2 radians and almost everyone writes 2, since the functions undo each other. The answer is pi minus 2, about 1.142. Nothing went wrong with the arithmetic: 2 radians is about 114.6 degrees, and the inverse sine is only permitted to return values between minus pi over 2 and pi over 2, so it returns the angle in range with the same sine. The same feature causes the other half of the chapter's difficulty. Solving sine theta equals a half does not give one answer but infinitely many, and writing them all requires a general solution. Underneath both is one fact: the trigonometric functions are periodic and therefore many-to-one. Defining an inverse restricts the domain to a single branch so that an inverse exists at all; writing a general solution removes the restriction again to recover every branch. Everything difficult in this chapter is bookkeeping about that.

Before you start — revise these

🔗
The definitions of the six ratios in a right-angled triangle and on the unit circle
🔗
Exact values at 0, 30, 45, 60 and 90 degrees
🔗
Solving quadratic equations and factorising, from Complex Numbers and Quadratic Equations
🔗
Domain and range of a function, and what makes a function invertible, from Sets, Relations and Functions

Trigonometry

Simplify , with in radians.

The functions undo each other, so the answer is . That is what everybody writes.

The answer is , not .

Nothing went wrong with the arithmetic. Two radians is about , and is only permitted to return values between and . It cannot return , because is outside its range, so it returns the angle in range with the same sine.

ExpressionReflexTruthWhy
is outside
is outside
is outside

The same feature causes the other half of the chapter's difficulty. Solve and the answer is not ; it is and and and infinitely many more.

y = 1/2 the principal one every crossing is a solution, and there are infinitely many in both directions general solution: theta = n pi + (-1)^n times pi/6 a periodic function is many-to-one, so one output has endlessly many inputs

The trigonometric functions are periodic, so they are many-to-one. Everything difficult in this chapter is bookkeeping about that one fact.

TaskWhat it does about the many-to-one problem
Defining an inverserestricts the domain to one branch, so an inverse exists at all
Writing a general solutionremoves the restriction again, recovering every branch
Simplifying reconciles the two, and is where marks are lost

1. Angles, Radians and the Ratios

Those last two hold only in radians, which is one reason radians are the default everywhere in calculus.

QuadrantPositive ratios
Iall
II and
III and
IV and

Signs matter more than values in this chapter, because most errors are a correct magnitude with the wrong sign attached.

2. The Fundamental Identities

The second and third are the first divided by and , so there is really one identity here, not three.

Cosine is even; sine and tangent are odd. That single line settles most sign questions faster than the quadrant table.

3. Compound, Multiple and Sub-Multiple Angles

Trap. The signs are reversed in the cosine formula: takes a minus. Checking with will not catch it; check with , where and only the correct signs deliver it.

Illustration 1

Find the exact value of , and derive .

Write as a difference of angles you already know.

For the triple angle, split as and expand each piece.

Replace by so that only sines remain, which is the point of the formula.

Every multiple-angle formula is built this way, so none of them needs to be memorised separately.

Illustration 2

If , prove that .

Use the condition to express one angle in terms of the others, then take tangents.

Now expand the left side by the compound-angle formula.

Cross-multiply and collect the terms, which is the whole of the remaining work.

The identity looks striking but the proof used only one fact: that the tangent of a supplement is the negative of the tangent. Every conditional identity of this kind works the same way, by converting the constraint into a statement about one ratio and then expanding.

4. Transformations: Sums and Products

A sum cannot be factorised; a product can. That is the whole reason to convert: an equation like is unsolvable as written and trivial once it becomes a product.

Illustration 3

Solve .

Expanding into cubes of would give a cubic. Convert the sum to a product instead.

A product is zero when either factor is, so the equation splits cleanly into two.

Both families are needed; neither contains the other, since appears only in the first and only in the second.

5. The Range of

Two waves of the same frequency always add to a single wave of that frequency, with a new amplitude and a phase shift. Since a sine never leaves :

+5 -5 3 sin theta 4 cos theta their sum: amplitude 5 R = root(3 squared + 4 squared) = 5, not 3 + 4 = 7

Trap. The maximum is , not . The two terms peak at different values of , so they can never both be at their maximum together.

Illustration 4

Find the maximum and minimum of .

The variable part has amplitude given by the square root of the sum of the squares.

Adding the constant shifts the whole range without changing its width.

The maximum is and the minimum is . Note that the naive would have been wrong by two, and that the minimum landing exactly on zero is a coincidence of these numbers rather than a general feature.

6. Trigonometric Equations and General Solutions

EquationGeneral solution

Each formula is the shape of that function's graph written in symbols. Sine is symmetric about , so its solutions alternate; cosine is symmetric about the -axis, so they come in pairs; tangent has period rather than , so its solutions are evenly spaced.

The method: reduce the equation to a single ratio of a single angle, then apply the matching row.

Illustration 5

Solve .

Two different ratios appear, so convert one into the other before anything else. The Pythagorean identity turns cosine squared into sine squared.

Reject . A sine never exceeds , so that factor contributes nothing, and stating the rejection is part of a complete answer.

Illustration 6

Solve , and explain why squaring must be checked.

Squaring both sides removes the mixed ratios, and it is the obvious move.

That offers , , and within one revolution. Test each in the original equation.

Valid?
yes
yes
no
no

Half of them are false. Squaring turns into , which also admits , so it manufactures solutions to a different equation.

Trap. Any step that squares, or multiplies by something that can vanish, can create false roots. Substitute every candidate back into the original.

Illustration 7

Solve .

The two sides use different ratios, so no general-solution row applies yet. Convert one into the other using the complementary relation.

Now the sine row applies, with .

The alternating sign means the even and odd cases must be handled separately.

Both families are part of the answer. Splitting on the parity of is compulsory whenever the sine row is used with the unknown appearing on both sides, because the two cases give genuinely different equations.

7. Inverse Trigonometric Functions: The Branch Problem

A periodic function is many-to-one, so it has no inverse at all until its domain is cut down to a stretch on which it is one-to-one. The chosen stretch is the principal branch.

FunctionDomainRange (principal values)
, excluding
, excluding
sine kept on [-pi/2, pi/2] cosine kept on [0, pi] tangent kept on (-pi/2, pi/2) on the kept branch each curve is one-to-one, so an inverse exists the three branches are different, which is why the three adjustments are different
y = x y = x only here pi - x -pi - x -pi/2pi/22 at x = 2 the value is pi - 2 arcsin of sin x: a zigzag that folds back, agreeing with x on one branch only

Outside that, reduce first: use to bring the angle into range, and similarly and .

Illustration 8

Evaluate , and , all in radians.

Check each argument against the relevant range before doing anything else.

. Since , the answer cannot be . Use , and does lie in .

. Since , it is outside . Cosine is even, so , and is in range.

. Since , subtract the period : , comfortably inside .

Three different adjustments, because the three ranges are different. Always compare the argument with the range before writing anything.

8. Properties of the Inverse Functions

Note the asymmetry in that last pair: the odd functions simply flip sign, while reflects about because its range is rather than a symmetric interval.

Trap. That condition is not decoration. When the true answer differs from the formula by , because the sum has left the principal range.

Illustration 9

Evaluate , and then .

For the first, check the condition: , so the formula applies directly.

Numerically, , confirming it.

For the second, , so the formula alone is wrong.

But both original terms are positive and each exceeds , so their sum must exceed and certainly cannot be negative. Add to bring it back.

Check: . Estimate the size of the answer before trusting the formula, and the correction becomes obvious rather than arbitrary.

Illustration 10

If , show that .

Rearrange so that one inverse sine stands alone, then use the complementary identity.

Take the sine of both sides. The right needs , which is the sine of an angle whose cosine is .

The positive root is correct because lies in , where the sine is never negative. That range check is what makes the step legitimate rather than a guess between two signs.

Illustration 11

Show that .

The previous illustration already established the awkward pair, so use it rather than starting again.

Numerically: .

The result is a small surprise worth sitting with. Each term is a perfectly ordinary angle under , yet the three sum to a straight angle exactly, with no approximation anywhere. Combining them in the other order works too, provided each application of the addition formula is checked against the condition: has and therefore needs its own correction by .

9. A Note on Syllabus Emphasis

The unit text names trigonometric identities and equations, trigonometric functions, and inverse trigonometric functions with their properties.

Named in the JEE Main unitNot named
identities and equationsheights and distances
trigonometric functionsproperties of triangles, sine and cosine rules
inverse functions and propertiessolutions of triangles

Heights and distances and the properties of triangles appear throughout older books and question banks, and remain examinable in JEE Advanced. For Main, the marks sit in general solutions and in the inverse functions, and within the inverse functions they sit almost entirely on the range restrictions.

Summary

The trigonometric functions are periodic, so they are many-to-one, and every difficulty here is bookkeeping about that.

An inverse function exists only after the domain is cut to a principal branch, so only for in . Outside it, reduce the angle into range first.

The three ranges differ, so the three adjustments differ: for sine, evenness for cosine, subtracting for tangent.

Arc length and sector area hold only in radians. Cosine is even, sine and tangent are odd, and that settles most sign questions.

There is really one Pythagorean identity; the other two are it divided through.

The compound-angle cosine formula reverses the signs, and every multiple-angle formula is built from the compound ones rather than memorised.

Convert sums to products when solving, because a sum cannot be factorised and a product splits into cases immediately.

has amplitude , never , because the two terms peak at different angles.

General solutions: sine alternates, cosine comes in pairs, tangent has period . Reduce to one ratio of one angle first.

Reject impossible roots such as , and say that you have.

Squaring manufactures solutions to a different equation, so substitute every candidate back into the original: loses half of them.

Conditional identities are proved by turning the constraint into a statement about one ratio, then expanding.

When the unknown appears on both sides of a sine equation, split on the parity of before solving.

needs ; beyond that the answer differs by . Estimate the size of the answer before trusting any inverse formula.

Key formulas & results

Everything to memorise for the exam hall, in one card. Screenshot this for revision.

The organising principle
the trigonometric functions are periodic, hence many-to-one
An inverse restricts the domain to one branch so that an inverse can exist; a general solution removes the restriction to recover all branches. Every difficulty in the chapter is bookkeeping about that.
Radians and the two formulas that need them
pi radians is 180 degrees; arc length is r theta and sector area is half r squared theta
Both hold ONLY in radians, which is one reason radians are the default throughout calculus. A degree symbol inside a limit or a derivative is always a deliberate trap.
The Pythagorean identity
sin squared plus cos squared equals 1, and its two divided forms
There is really one identity here, not three: dividing by cos squared gives the secant form and by sin squared the cosecant form. Cosine is even; sine and tangent are odd.
Compound angles
sin(A plus or minus B) keeps the signs; cos(A plus or minus B) REVERSES them
Check the cosine version with A = B = pi/2, where the answer must be minus 1. Testing with zero angles will not catch a sign error.
Multiple and sub-multiple angles
sin 2t = 2 sin t cos t; cos 2t has three forms; sin 3t = 3 sin t minus 4 sin cubed t
Every one is built by splitting the angle and applying the compound formula, so none needs separate memorisation. Deriving sin 3t takes three lines.
Sums to products
cos A + cos B = 2 cos of the half-sum times cos of the half-difference, and three companions
A sum cannot be factorised and a product can. That is the entire reason to convert, and it turns an unsolvable equation into a pair of easy cases.
Range of a sine plus b cosine
equals R sin(theta + phi) with R the square root of a squared plus b squared
The maximum is that square root, NEVER a plus b, because the two terms peak at different angles. Adding a constant shifts the range without changing its width.
General solutions
sine: n pi plus (-1)^n alpha; cosine: 2n pi plus or minus alpha; tangent: n pi plus alpha
Each formula is the shape of that graph in symbols. Sine is symmetric about pi/2 so its solutions alternate; cosine is even so they pair; tangent has period pi so they are evenly spaced.
Method for equations
reduce to a single ratio of a single angle, then apply the matching row
Convert one ratio into another using the Pythagorean identity, or convert a sum into a product. Reject impossible roots such as sine equals 2, and say that you have.
Squaring creates false roots
X = 1 becomes X squared = 1, which also admits X = -1
For sin theta plus cos theta equals 1, squaring offers four candidates in a revolution and exactly half of them fail. Substitute every candidate back into the ORIGINAL equation.
Principal branches
arcsin into [-pi/2, pi/2]; arccos into [0, pi]; arctan into the open interval (-pi/2, pi/2)
The three ranges differ, so the three adjustments differ: use pi minus x for sine, evenness for cosine, and subtract pi for tangent.
Complementary and reflection identities
arcsin x plus arccos x equals pi/2; arcsin(-x) = -arcsin x while arccos(-x) = pi minus arccos x
The odd inverses simply flip sign, but arccos reflects about pi/2 because its range is [0, pi] rather than a symmetric interval.
Inverse tangent addition
arctan x plus arctan y equals arctan of (x+y)/(1-xy), ONLY IF xy is less than 1
When xy exceeds 1 the true answer differs by pi, because the sum has left the principal range. Estimate the size of the answer before trusting the formula.
⚠️

Traps JEE Main sets — and how to dodge them

These are the exact option-traps and misreads that cost marks under negative marking.

WATCH OUT
Writing arcsin(sin x) = x for every x
It holds only when x already lies in the principal range. For x = 2 radians the answer is pi minus 2, about 1.142. Compare the argument with the range before writing anything, and reduce the angle into range first using the relevant symmetry.
Why it happens: The two operations are introduced as inverses of each other, and the restriction is stated once and then forgotten.
WATCH OUT
Giving only the principal solution to a trigonometric equation
A periodic function takes every attainable value infinitely often. Unless the question restricts the interval, use the general solution: n pi plus (-1)^n alpha for sine, 2n pi plus or minus alpha for cosine, n pi plus alpha for tangent.
Why it happens: The calculator returns one value and it satisfies the equation.
WATCH OUT
Taking the maximum of a sine plus b cosine to be a plus b
The two terms peak at different angles, so they never both reach their maxima together. The true amplitude is the square root of a squared plus b squared: for 3 sine plus 4 cosine that is 5, not 7.
Why it happens: Each term has that maximum, so the sum looks as though it should reach the total.
WATCH OUT
Keeping every root after squaring an equation
Squaring turns X = 1 into X squared = 1, which also admits X = -1, so it solves a different equation. For sine plus cosine equal to 1, two of the four candidates in a revolution fail. Substitute every candidate back into the original.
Why it happens: Squaring is a legitimate algebraic step and the roots are genuine roots of the squared equation.
WATCH OUT
Applying the arctan addition formula without checking xy
When xy exceeds 1 the sum has left the principal range and the answer differs by pi. Arctan 2 plus arctan 3 comes out as minus pi/4 from the formula alone, which is impossible since both terms are positive; the answer is 3pi/4. Estimate the size of the answer first.
Why it happens: The condition is written beside the formula rather than inside it.
WATCH OUT
Reversing the signs in the compound-angle formulas
Cosine of a sum takes a MINUS. Verify with A = B = pi/2, where the answer must be cos pi, that is minus 1: only the correct signs give it. Testing with zero angles gives 1 either way and catches nothing.
Why it happens: The sine version keeps its sign and the cosine version does not, and the two are learnt together.

Exam-pattern practice

PYQ-style questions with full solutions. Work through them as a readiness check — mark yourself honestly and get your gap report at the end.

Readiness check

Are you exam-ready for Trigonometry?

12 problems from this chapter. Try each one, reveal the worked solution, mark yourself honestly — get your gap report at the end.

12 questions~8 min

5-minute revision

The whole chapter, distilled. Read this the night before the exam.

  • Periodic means many-to-one; inverses restrict a branch and general solutions restore them all
  • arcsin(sin x) equals x only inside the principal range; reduce the angle first
  • The three principal ranges differ, so the three adjustments differ
  • Arc length and sector area hold only in radians
  • One Pythagorean identity, divided two ways; cosine even, sine and tangent odd
  • Cosine of a sum takes a MINUS; check with A = B = pi/2
  • Every multiple-angle formula is built from the compound ones
  • Convert sums to products, because only a product factorises
  • Amplitude of a sine plus b cosine is the root of a squared plus b squared, never a plus b
  • Reject impossible roots such as sine equals 2, and say so
  • Squaring solves a different equation; substitute every candidate back
  • arctan x plus arctan y needs xy below 1, or the answer shifts by pi

JEE Main question blueprint

How this topic is asked, tier by tier — so you can prep to the pattern.

Typical weightage: 4

Question styleMarks eachTypical countWhat it tests
Identities and compound angles11
Trigonometric equations and general solutions21
Inverse trigonometric functions11

Exam-hall strategy

Battle-tested tips from mentors and toppers for this topic under the sectional clock.

  1. Before simplifying any nested inverse expression, write down the principal range of the outer function and compare the argument with it. That single check is where most of the marks in this unit are decided.
  2. Reduce every equation to one ratio of one angle before reaching for a general-solution formula. Mixed ratios mean use the Pythagorean identity; a sum of terms means convert to a product.
  3. State any rejected root explicitly. Sine equal to 2 or cosine equal to minus 2 appearing as a factor is deliberate, and saying that it is impossible is part of the answer.
  4. After squaring, or after multiplying by anything that could vanish, substitute every candidate back into the original equation. Half the candidates commonly fail.
  5. Estimate the size of an inverse-function answer before trusting a formula. If arctan of two positive numbers comes out negative, the answer is short by pi and the correction is obvious rather than remembered.

Beyond the exam

Where this skill shows up in the job you're competing for — and in life.

Alternating current

Alternating current, sound and light are all modelled as a sine plus b cosine, and the fact that they combine into a single wave of amplitude root of a squared plus b squared is exactly how two signals of the same frequency are added in practice

Navigation and surveying rely on the compound-angle and m…

Navigation and surveying rely on the compound-angle and multiple-angle formulas to convert between bearings measured from different reference directions without re-measuring anything

Signal processing and control systems work in radians thr…

Signal processing and control systems work in radians throughout, because arc length, sector area and every derivative formula acquire an extra factor of pi over 180 in degrees, which is precisely the trap this chapter opens on

Where else this topic is tested

Prepare once, score in every exam that asks it.

JEE Main
JEE Advanced
BITSAT
WBJEE
MHT CET

Questions aspirants ask

Pulled from the Q&A community and mentor sessions.

Because the inverse sine is not the undoing of the sine on the whole real line. The sine takes every value in its range infinitely often, so it has no inverse until its domain is cut down to a stretch where it is one-to-one, and the chosen stretch runs from minus pi over 2 to pi over 2. The inverse sine is only permitted to return values in that interval. Since 2 radians is about 114.6 degrees, outside the interval, the function returns the angle inside it with the same sine, which is pi minus 2. The general rule is to compare the argument with the range before doing anything, and if it falls outside, use the appropriate symmetry to bring it inside first. Which symmetry depends on the function, since the three ranges are different.

By which ratio the equation reduces to, so the first task is always to reach a single ratio of a single angle. If the equation mixes sines and cosines, use the Pythagorean identity to convert one into the other, which usually turns it into a quadratic. If it is a sum of trigonometric terms set to zero, convert the sum to a product and treat each factor separately. Once you have sine of something equals a constant, use n pi plus minus-one-to-the-n times alpha; for cosine use 2n pi plus or minus alpha; for tangent use n pi plus alpha. The three formulas are just the shapes of the three graphs: sine is symmetric about pi over 2 so its solutions alternate, cosine is symmetric about the axis so they pair up, and tangent repeats every pi rather than every 2 pi.

Because squaring is not reversible. The equation X equals 1 has one solution, but X squared equals 1 has two, since minus one squared is also one. So after squaring you are solving a strictly larger problem, and some of its answers belong to X equals minus 1 rather than to the equation you started with. Nothing is wrong with the technique, and it is often the only way to clear mixed ratios; what is compulsory is testing every candidate in the original equation afterwards. For sine plus cosine equal to 1, squaring offers four candidates in one revolution and exactly two of them are genuine. The same warning applies to any step that multiplies through by a quantity that could be zero, which can also add roots.

Because the two terms reach their maxima at different angles. Sine peaks at pi over 2, where the cosine is zero, and cosine peaks at zero, where the sine is zero, so they can never both be at their largest at the same moment. Writing the expression as a single wave makes the true answer visible: a sine theta plus b cosine theta equals R sine of theta plus phi, where R is the square root of a squared plus b squared, and a sine never leaves the interval from minus one to one. For 3 sine plus 4 cosine the amplitude is 5, not 7. The phase shift phi is what encodes the compromise between the two peaks, and it is also why the maximum occurs at an angle that is generally not a nice value.

When the product xy is greater than 1. The formula computes an angle whose tangent is the right value, but the inverse tangent always returns a result between minus pi over 2 and pi over 2, and the true sum may lie outside that. If both x and y are positive and their product exceeds 1, each term individually exceeds pi over 4, so the sum exceeds pi over 2 and the formula's answer is short by pi. Arctan 2 plus arctan 3 illustrates it exactly: the formula returns minus pi over 4, which cannot be right for a sum of two positive angles, and adding pi gives the correct 3 pi over 4. The practical habit is to estimate the size of the answer before applying the formula, so that a correction announces itself rather than being remembered as a rule.
Header Logo