By the end of this chapter you'll be able to…

  • 1Apply Werner's primary and secondary valence to deduce a formula from precipitation data, and follow his isomer-counting argument for the octahedron
  • 2Use the vocabulary precisely, distinguishing coordination number from ligand count, and explain the chelate effect as an entropy effect
  • 3Name complexes by IUPAC rules and work the rules in reverse to write a formula from a name
  • 4Identify all four structural isomerism types and their diagnostics, and decide geometrical and optical isomerism for octahedral and square planar complexes
  • 5Assign hybridisation by valence bond theory, predict geometry and magnetism, and state the theory's three limitations
  • 6Apply crystal field theory: split the d orbitals, decide high or low spin from against , compute CFSE, and relate to observed colour
💡
Why this chapter matters in JEE Main
A complex is a Lewis acid-base adduct that survives in solution, and the whole chapter exists to answer three questions about it: what shape, what colour, what magnetism. Cis-platin and trans-platin share a formula and differ by 90 degrees, which is the difference between a front-line cancer drug and an inactive poison, so the rules about geometry are not bookkeeping. Valence bond theory answers the three questions through hybridisation but says nothing about colour and can only label ligands strong or weak after the fact. Crystal field theory repairs that by putting a number on the splitting, which lets one quantity decide spin state and colour together.

Before you start — revise these

🔗
Lewis acids and bases, and dative bonding, from Chemical Bonding
🔗
d-block electronic configurations and the spin-only formula from d- and f-Block Elements
🔗
VSEPR geometries and hybridisation schemes
🔗
Optical activity and the meaning of a non-superimposable mirror image

Coordination Compounds

Two compounds. Same formula, . Same atoms in the same numbers, the same two Pt-Cl bonds and the same two Pt-N bonds, the same molar mass, the same square planar geometry around platinum.

One of them is a front-line anticancer drug that has been used on millions of patients since 1978.

The other does essentially nothing therapeutically, and is simply toxic.

CIS: the drug TRANS: inactive Pt Pt ClCl ClCl NH3NH3 NH3NH3 90 degrees 180 degrees reaches two adjacent bases DNA is kinked, the cell dies cannot span the same pair no cross-link, no effect

The difference is 90 degrees.

In cis-platin the two chlorides sit on adjacent corners of the square, close enough that once they hydrolyse away, platinum can grip two neighbouring guanine bases on the same strand of DNA. The strand kinks, replication stalls, and the cell dies.

In trans-platin the chlorides sit opposite each other, 180 degrees apart. Platinum can still bind DNA, but never two adjacent bases at once, so no cross-link forms.

A formula cannot tell those two apart. Nothing about distinguishes a drug from a poison, and that is exactly why this chapter's rules exist.

The three questionsWhat answers them
What shape?Werner's theory, coordination number, isomerism
What colour?Crystal field theory, through the size of
What magnetism?High spin or low spin, decided by against

A complex is a Lewis acid-base adduct that survives in solution. The nomenclature exists to name the entity precisely enough that the questions have definite answers, and the two bonding theories exist to answer them.

Valence bond theory answers through hybridisation. Crystal field theory answers by putting a number on the splitting, which is why it can predict colour and explain why the same metal ion is high spin with one ligand and low spin with another.

1. Werner's Theory

Werner faced a puzzle. Cobalt(III) chloride combines with ammonia in several fixed ratios, and the products differ in colour and, decisively, in how much chloride they surrender to silver nitrate.

CompoundMoles of AgCl precipitatedIons in solution
34
23
12
01

If all three chlorides were equivalent, every row would read 3. They do not.

Primary valence is ionisable, satisfied by anions, and equal to the oxidation state. Secondary valence is non-ionisable, directed in space, and equal to what we now call the coordination number.

Chloride inside the coordination sphere is bonded to cobalt and cannot be precipitated. Chloride outside is a free ion and can. That one distinction explains the whole table, and Werner proposed it decades before anyone understood bonding.

Illustration 1

Werner also claimed that coordination number 6 means octahedral. He had no X-ray crystallography, no spectroscopy and no bonding theory. How could he possibly know?

He counted isomers. Three geometries can hold six ligands around a centre, and each predicts a different number of isomers for the composition .

GeometryDistinct isomersWhy
Planar hexagon3B atoms at 1,2 or 1,3 or 1,4
Trigonal prism3Three inequivalent B-B separations
Octahedron2Only cis and trans

Every cobalt(III) complex anyone prepared gave exactly two isomers. Never three.

That is a negative result doing positive work: two of the three candidate geometries predict an isomer nobody has ever isolated, so both are dead. The octahedron predicts precisely what is seen.

The reasoning is worth pausing on, because it is how structure was determined before instruments existed. Count what a geometry requires, then count what nature supplies, and eliminate. Werner received the 1913 Nobel Prize for this argument.

2. The Vocabulary

Ligand. A species that donates a lone pair to the metal. It must have at least one available lone pair, which is why ammonia is a ligand and methane is not.

Coordination number. The number of donor atoms bonded to the metal, not the number of ligands. In there are three ligands and a coordination number of six.

Denticity. The number of donor atoms one ligand offers.

DenticityNameExamples
1Monodentate, , , , CO
2Bidentateethane-1,2-diamine (en), oxalate
6HexadentateEDTA

Ambidentate ligand. One with two different donor atoms that can bind through either. binds through N or O; through S or N.

Chelation. Ring formation when a polydentate ligand binds through more than one donor atom to the same metal.

The chelate effect

Chelate complexes are far more stable than comparable complexes of monodentate ligands, even when the donor atoms are chemically almost identical.

Illustration 2

and ethane-1,2-diamine both donate through nitrogen, and both give nickel(II) a coordination number of six. Yet is 8.6 for and 18.3 for . That is a factor of in stability constant. Where does it come from?

Not from the bonds. Six Ni-N bonds are formed in both cases and they are essentially the same bonds, so the enthalpy change is nearly identical.

It comes from counting particles. Write both substitutions honestly, with the displaced water included.

Seven particles in, seven out. Entropy barely moves.

Four particles in, seven out. Three extra free particles is a substantial entropy gain, and at 298 K a term of that size is worth tens of kilojoules.

The chelate effect is therefore an entropy effect almost in its entirety, which is why it survives even when the chelating ligand forms slightly weaker bonds. Five- and six-membered rings are preferred because they are the least strained, and EDTA forms five of them at once, which is why it is such a formidable complexing agent.

3. IUPAC Nomenclature

The rules are mechanical once applied in the right order.

StepRule
1Name the cation first, then the anion, whichever is the complex
2Within the complex, name ligands alphabetically, ignoring multiplying prefixes when alphabetising
3Anionic ligands end in -o: chlorido, cyanido, hydroxido, oxalato, sulphato
4Neutral ligands keep their names, except aqua, ammine, carbonyl and nitrosyl
5di, tri, tetra for simple ligands; bis, tris, tetrakis when the ligand name already contains a multiplier
6Oxidation state of the metal in Roman numerals, in parentheses
7If the complex ion is an anion, the metal takes -ate, often on a Latin stem

The Latin stems that matter: ferrate for iron, cuprate for copper, argentate for silver, plumbate for lead, stannate for tin, aurate for gold.

So is tetraamminedichloridocobalt(III) chloride, and is potassium hexacyanidoferrate(II).

Illustration 3

Work the rules in reverse. Write formulas for pentaamminenitrito-N-cobalt(III) chloride and for tris(ethane-1,2-diamine)cobalt(III) sulphate.

First. Five ammines, one nitrito bound through nitrogen, cobalt(III), and chloride outside as the counter ion.

Charge inside: from cobalt, 0 from five ammines, from nitrite, giving . So two chlorides balance it.

Second. Three "en" ligands, which is why the prefix is tris and not tri, cobalt(III), sulphate outside.

Charge inside: , with all three ligands neutral. Sulphate is . Balancing against needs the lowest common multiple: two complex ions to three sulphates.

Trap. The bis, tris and tetrakis prefixes are not stylistic. They exist because "diethylenediamine" would be ambiguous, and using the wrong set is one of the few nomenclature errors that changes what a name means rather than merely how it reads.

4. Isomerism

Structural isomerism

TypeWhat is exchangedExample
IonisationLigand with counter ion and
HydrateCoordinated water with lattice waterThe three isomers of
LinkageDonor atom of an ambidentate ligandnitrito-N against nitrito-O
CoordinationLigands between a complex cation and complex anion and its swap

Illustration 4

Two solids share the formula . One is yellow and one is red, and the red one slowly turns yellow on standing. Identify them.

is ambidentate, so these are linkage isomers.

The red form is bound through oxygen, the nitrito-O isomer. The yellow form is bound through nitrogen, the nitrito-N isomer.

The conversion runs one way only, red to yellow, because the nitrogen-bound form is the more stable of the two. Nitrogen is the softer, more polarisable donor and cobalt(III) binds it better.

Note what identified them here: colour and a one-way conversion, not a chemical test. Ionisation isomers are distinguished by precipitating the free ion, hydrate isomers by measuring water content, and linkage isomers by spectra. Each type has its own diagnostic, and questions usually supply exactly one.

Stereoisomerism

Geometrical isomerism requires that different spatial arrangements be genuinely distinct.

CaseIsomers
Octahedral cis and trans
Octahedral facial (fac) and meridional (mer)
Square planar cis and trans
Tetrahedral, anynone

Tetrahedral complexes show no geometrical isomerism because all four positions are mutually adjacent, so no cis or trans distinction can be drawn.

Optical isomerism requires a non-superimposable mirror image, and is common in octahedral complexes with bidentate ligands: , and the cis isomer of . The trans isomer of that same complex has a plane of symmetry and is optically inactive, which is the standard discriminating question.

Illustration 5

How many stereoisomers does have, and is either optically active?

This is , so the choice is how the three chlorides are arranged on the octahedron.

Facial. All three chlorides occupy one triangular face, mutually cis, each 90 degrees from the other two.

Meridional. The three chlorides lie on a meridian, one great circle through the octahedron, so two are trans to each other and the third is cis to both.

There is no third arrangement. Any placement of three ligands on an octahedron either has them all on a face or all on a meridian.

Both are optically inactive. The fac isomer has a three-fold axis and three mirror planes; the mer isomer has a mirror plane containing all three chlorides. Either plane makes the mirror image superimposable.

That last point matters. Geometrical isomerism does not imply optical isomerism, and is the cleanest case where two geometrical isomers exist and neither is chiral.

cis isomer Pt Cl Cl NH₃ NH₃ cisplatin — anticancer drug trans isomer Pt Cl Cl NH₃ NH₃ inactive Same atoms, same bonds, different arrangement — and one of them is a drug.

Illustration 6

Two solids share the formula . One is and the other is . Give tests that tell them apart.

Only ions outside the coordination sphere dissociate in water. Everything inside the square brackets is bonded to the cobalt and stays there.

Add barium chloride solution. The first compound has free sulphate, so it gives a white precipitate of . The second has its sulphate bonded to cobalt, so nothing happens.

Add silver nitrate solution. Now it is the other way round: the second compound gives a pale yellow precipitate of AgBr, and the first gives nothing.

The square brackets are therefore not typography. They are a claim about which ions are free in solution, and the claim is directly testable.

This is precisely the reasoning Werner used. Treating with silver nitrate and counting how many chlorides precipitated told him how many were ionisable, and by difference how many were bonded to the metal — which is how the idea of a coordination sphere was established before anyone could see one.

5. Valence Bond Theory

The metal provides empty orbitals which hybridise, and each ligand donates a lone pair into one of them.

Coordination numberHybridisationGeometry
4Tetrahedral
4Square planar
6Octahedral, inner orbital, low spin
6Octahedral, outer orbital, high spin

Inner orbital complexes use orbitals, which requires the d electrons to pair up first and leave two orbitals empty. Outer orbital complexes use orbitals, so no pairing is forced.

Illustration 7

is . Both and have coordination number 4. Predict the geometry of each.

The instinct from organic chemistry is that four groups means tetrahedral. It is right once and wrong once.

Ligand fieldWeakStrong
arrangementLeft alone, 2 unpairedForced into four orbitals, 0 unpaired
Hybridisation
GeometryTetrahedralSquare planar
MagnetismParamagnetic, 2.83 BMDiamagnetic

The chloride is too weak to disturb the arrangement, which keeps two unpaired electrons in two different d orbitals. Every 3d orbital is then occupied, none is available to hybridise, and nickel must use and : four orbitals, , tetrahedral.

Cyanide is strong enough to force those two electrons to pair. That empties one 3d orbital, which can now join the hybridisation as : four orbitals in a plane, square planar, and no unpaired electrons left.

Same metal, same oxidation state, same coordination number. The ligand chose the geometry, and a magnetic measurement alone distinguishes the two.

Where it fails

Valence bond theory gives geometry and magnetism correctly for most complexes and gives no account of colour at all. It cannot explain why one ligand forces pairing and another does not, beyond labelling them strong and weak after the fact. It offers no way to rank ligands and no quantitative prediction of anything.

Those failures are exactly what crystal field theory repairs.

6. Crystal Field Theory

Crystal field theory treats the metal-ligand interaction as purely electrostatic. The ligands are point negative charges, and their approach raises the energy of the metal's d orbitals.

They do not all rise equally.

free ion all five equal eg, point AT the ligands t2g, point BETWEEN them delta o +0.6 above -0.4 below the same d6 ion, two ligands weak field, delta o less than P HIGH SPIN, 4 unpaired [CoF6]3-, paramagnetic strong field, delta o more than P LOW SPIN, 0 unpaired [Co(NH3)6]3+, diamagnetic

In an octahedral field, and point directly at the approaching ligands and are pushed up hardest, while , and point between them and rise less. The result is a lower triply degenerate set and an upper doubly degenerate set, separated by the crystal field splitting energy .

High spin against low spin

Once the split exists, filling it is a competition. A fourth electron entering the lower set costs the pairing energy ; entering the upper set costs .

That is why the same ion is high spin with fluoride and low spin with cyanide. The metal did not change; the splitting did.

The spectrochemical series

IBrClF OHH2ONH3en NO2CNCO pairing energy P sits about here weak field, delta o below P HIGH SPIN strong field, delta o above P LOW SPIN neutral CO outranks charged halides, which a purely electrostatic model cannot explain

Note the embarrassment at the strong end: neutral CO outranks negatively charged halides, which a purely electrostatic model cannot explain. That discrepancy is a genuine limitation, repaired only by ligand field theory, beyond this syllabus.

Tetrahedral fields

A tetrahedral field splits the orbitals the other way up, with the lower set doubly degenerate, and the splitting is much smaller.

Because is so small it is essentially never larger than . Tetrahedral complexes are therefore always high spin, and no low spin tetrahedral complex needs considering.

Crystal field stabilisation energy

Each electron in the lower octahedral set is stabilised by and each in the upper set destabilised by .

Illustration 8

Compute the CFSE of a high spin octahedral ion, such as or , and say what follows.

High spin places one electron in each of the five orbitals: three in and two in .

Exactly zero. A high spin ion gains nothing whatsoever from the crystal field, whatever the ligand.

Three consequences follow, and all three are observable.

forms the weakest complexes of any first-row divalent ion, which is the dip at manganese in the Irving-Williams stability order.

Its complexes are very pale, almost colourless, because every d-d transition would have to change the spin as well as the orbital, and spin-forbidden transitions are extraordinarily weak.

And , also high spin , has no crystal field preference between geometries, so it adopts whatever the ligands' size and charge dictate rather than what the field would prefer.

A CFSE of zero is not an absence of an answer. It is the answer, and it predicts three separate observations.

Colour and magnetism, explained

Colour is now straightforward. An electron absorbs a photon whose energy matches and jumps from the lower set to the upper. Since depends on the ligand, the same metal gives different colours with different ligands, which valence bond theory could never explain.

A or ion has no such transition available, which is why and complexes are white.

Illustration 9

absorbs most strongly at 500 nm and looks violet. Find in kJ mol, then predict how the colour changes if water is replaced by ammonia.

Convert the absorbed wavelength to an energy per mole.

That is comparable to a chemical bond, from an interaction the theory models as nothing more than point charges pushing on orbitals.

The colour follows from what was not absorbed. Removing green from white light leaves red and blue, which the eye reads as violet.

Now swap the ligand. Ammonia sits above water in the spectrochemical series, so increases, so the absorbed photon must carry more energy, so the absorption moves to shorter wavelength. The same reasoning explains why is a pale blue and is the deep royal blue of the standard test.

Trap. Larger means a shorter absorbed wavelength, and the colour you see is the complement of the colour absorbed. Two inversions in a row, and dropping either one gives an answer that is exactly backwards.

Magnetism follows from the unpaired electron count after the high spin or low spin decision, using the spin-only formula from the previous chapter.

Illustration 10

is diamagnetic, while has a magnetic moment near 4.9 BM. Both are octahedral iron(II). Account for the difference and give the unpaired electron count in each.

Iron(II) is in both complexes, so the electron count cannot be what separates them. What differs is how those six electrons are arranged, and the ligand decides that.

Cyanide sits high in the spectrochemical series and is a strong-field ligand, so the splitting exceeds the pairing energy . Electrons pair up in the lower set rather than climb:

Water is a weak-field ligand, so and the electrons spread out instead:

Check that against the measurement using the spin-only formula:

which is the quoted value.

So the metal and its oxidation state fix how many d electrons there are, and the ligand fixes how they sit. Same ion, same geometry, opposite magnetic behaviour — and a magnetic measurement is therefore a direct read-out of where a ligand falls in the spectrochemical series.

7. Importance of Coordination Compounds

In qualitative analysis, complex formation makes many tests work. Silver chloride dissolves in ammonia as the diamminesilver(I) ion, and copper(II) gives the deep blue tetraamminecopper(II) ion.

In metallurgy, gold and silver are extracted by cyanide leaching, dissolving as soluble cyanido complexes and later displaced by zinc. Nickel is purified by the Mond process through volatile , which decomposes on heating to leave pure metal.

In biology, haemoglobin carries oxygen on an iron centre, chlorophyll is a magnesium complex and vitamin is a cobalt complex. All three are chelates of large ring ligands.

In medicine, EDTA sequesters calcium and magnesium in water softening and treats lead poisoning by chelating the metal for excretion. Cis-platin is the anticancer drug this chapter opened on, and the trans isomer is inactive.

Illustration 11

Lead poisoning is treated by giving the patient EDTA. Why does a chelating agent remove lead without stripping the body of every other metal it needs?

Because stability constants differ enormously, and the treatment exploits the gap.

Ion with EDTA
18.0
10.7
8.7

Lead binds more than seven orders of magnitude more tightly than calcium.

So the drug is administered as the calcium salt, , already saturated with the metal it is allowed to lose. On meeting lead, the exchange runs strongly forward, releasing harmless calcium and locking up the lead as a stable, water-soluble complex the kidneys excrete.

Give free EDTA instead and it would strip calcium out of the blood indiscriminately, which is fatal. The chelate effect is doing the therapeutic work, and the choice of counter-ion is what keeps it selective.

Summary

A complex is a Lewis acid-base adduct that survives in solution, and the chapter exists to answer three questions about it: what shape, what colour, what magnetism. Cis-platin and trans-platin share a formula and differ by 90 degrees, which is the difference between a drug and a poison.

Werner separated primary from secondary valence to explain why gives only one mole of silver chloride, and established the octahedron by isomer counting: a planar hexagon and a trigonal prism each predict three isomers, and only two are ever found.

Coordination number counts donor atoms, not ligands. The chelate effect is almost entirely entropic, since three bidentate ligands displacing six waters turns four particles into seven, and it is worth about in stability constant for nickel.

Nomenclature runs cation first, ligands alphabetically, anionic ligands in -o, bis and tris when the ligand name already carries a multiplier, and -ate on a Latin stem for anionic complexes.

Structural isomerism comes in four kinds, each with its own diagnostic. Geometrical isomerism gives cis and trans for and fac and mer for , never anything for tetrahedral, and it does not imply optical activity: both isomers are achiral.

Valence bond theory assigns hybridisation, and the ligand chooses it: is tetrahedral and paramagnetic while is square planar and diamagnetic. It says nothing about colour and cannot rank ligands, which is exactly what crystal field theory supplies.

Crystal field theory splits the d orbitals by and lets against decide high spin or low spin. , so tetrahedral complexes are always high spin. CFSE is , and it is exactly zero for high spin , which is why complexes are the weakest and palest of the row.

Colour is the transition: absorbs at 500 nm, giving kJ mol, and a stronger ligand shifts the absorption to shorter wavelength while the eye sees the complement of whatever was absorbed.

Key formulas & results

Everything to memorise for the exam hall, in one card. Screenshot this for revision.

The organising principle
a complex is a Lewis adduct that survives in solution; ask what shape, what colour, what magnetism
Every rule in the chapter exists to specify the entity precisely enough that those three questions have definite answers. Cis-platin against trans-platin is what happens when shape is the only variable left.
Werner's two valencies
primary valence is ionisable and equals the oxidation state; secondary valence is directed and equals the coordination number
Chloride inside the sphere cannot be precipitated by silver nitrate; chloride outside can. This alone explains why $\mathrm{CoCl_3 \cdot 6NH_3}$ gives 3 mol of AgCl and $\mathrm{CoCl_3 \cdot 3NH_3}$ gives none.
Coordination number
count **donor atoms**, not ligands
$[\mathrm{Co(en)_3}]^{3+}$ has three ligands and a coordination number of six. Denticity is how many donor atoms one ligand offers: 1 monodentate, 2 bidentate, 6 for EDTA.
Chelate effect
$[\mathrm{Ni(H_2O)_6}]^{2+} + 3\,\mathrm{en} \rightarrow [\mathrm{Ni(en)_3}]^{2+} + 6\mathrm{H_2O}$: 4 particles in, 7 out
Almost entirely entropic, since the bonds formed are nearly identical. $\log \beta$ is 8.6 for the hexaammine and 18.3 for the tris(en) complex, a factor of $10^{10}$. Five- and six-membered rings are least strained.
Nomenclature order
cation first; ligands alphabetically; anionic ligands in -o; oxidation state in Roman numerals
Use **bis, tris, tetrakis** when the ligand name already contains a multiplier, as with ethane-1,2-diamine. Anionic complexes take -ate, often on a Latin stem: ferrate, cuprate, argentate, plumbate, stannate, aurate.
Structural isomerism
ionisation, hydrate, linkage, coordination
Each has its own diagnostic: precipitate the free ion, measure water content, take a spectrum, identify both complex ions. Linkage isomers of $[\mathrm{Co(NH_3)_5(NO_2)}]\mathrm{Cl_2}$ are red (O-bound) converting to yellow (N-bound).
Geometrical isomerism
octahedral $\mathrm{MA_4B_2}$ gives cis and trans; $\mathrm{MA_3B_3}$ gives fac and mer; tetrahedral gives none
In a tetrahedron every vertex is adjacent to every other, so no trans relationship exists. Geometrical isomerism does not imply chirality: both $\mathrm{MA_3B_3}$ isomers have a mirror plane and are optically inactive.
Valence bond hybridisation
$sp^3$ tetrahedral, $dsp^2$ square planar, $d^2sp^3$ inner octahedral, $sp^3d^2$ outer octahedral
The ligand chooses: $\mathrm{Ni^{2+}}$ gives $sp^3$ tetrahedral paramagnetic $[\mathrm{NiCl_4}]^{2-}$ and $dsp^2$ square planar **diamagnetic** $[\mathrm{Ni(CN)_4}]^{2-}$, at the same coordination number.
Crystal field splitting
$\Delta_o > P$ gives low spin; $\Delta_o < P$ gives high spin
$d_{z^2}$ and $d_{x^2-y^2}$ point at the ligands and rise into $e_g$; the other three become $t_{2g}$. The metal does not change between $[\mathrm{CoF_6}]^{3-}$ and $[\mathrm{Co(NH_3)_6}]^{3+}$; only $\Delta_o$ does.
Spectrochemical series
$\mathrm{I^- < Br^- < Cl^- < F^- < OH^- < H_2O < NH_3 < en < NO_2^- < CN^- < CO}$
Neutral CO outranking charged halides is a genuine embarrassment for a purely electrostatic model, repaired only by ligand field theory beyond this syllabus.
Tetrahedral fields
$\Delta_t = \tfrac{4}{9}\Delta_o$, so tetrahedral complexes are **always** high spin
Four ligands rather than six, and none pointing directly at a d orbital. The gap is essentially never larger than $P$, which removes a whole branch of case analysis.
CFSE and colour
$\text{CFSE} = \left(-0.4\,n_{t_{2g}} + 0.6\,n_{e_g}\right)\Delta_o$
High spin $d^5$ gives exactly zero, which is why $\mathrm{Mn^{2+}}$ forms the weakest and palest complexes of the row. Colour comes from a photon matching $\Delta_o$: $[\mathrm{Ti(H_2O)_6}]^{3+}$ absorbs at 500 nm, so $\Delta_o = 239$ kJ mol$^{-1}$.
Ionisation isomerism and what the brackets mean
Only ions outside the square brackets dissociate, so $\mathrm{BaCl_2}$ precipitates sulphate from the first and $\mathrm{AgNO_3}$ precipitates bromide from the second. The brackets are a testable claim about which ions are free — the same counting argument by which Werner established the coordination sphere.
⚠️

Traps JEE Main sets — and how to dodge them

These are the exact option-traps and misreads that cost marks under negative marking.

WATCH OUT
Counting ligands instead of donor atoms for the coordination number
Coordination number counts bonds to the metal. has three ligands and coordination number six, and has one ligand and coordination number six. Getting this wrong assigns the wrong geometry, then the wrong hybridisation, then the wrong magnetic moment, so the error propagates through every part of the answer.
Why it happens: For monodentate ligands the two numbers coincide, which is most of the examples met first.
WATCH OUT
Assuming four ligands means tetrahedral
For a ion the ligand decides. A weak ligand leaves the arrangement alone, every 3d orbital is occupied, and the metal must use , giving tetrahedral and paramagnetic . A strong ligand forces pairing, empties one 3d orbital for , and gives square planar diamagnetic . A magnetic measurement alone tells the two apart.
Why it happens: Four groups around carbon is always tetrahedral, and that instinct transfers.
WATCH OUT
Getting the colour direction backwards
A stronger ligand gives a larger , which needs a more energetic photon, which means a shorter absorbed wavelength. Then the colour observed is the complement of the colour absorbed. absorbs green at 500 nm and looks violet; replacing water by ammonia raises and moves the absorption to shorter wavelength, which is why is far deeper than the aqua ion.
Why it happens: There are two inversions in a row and dropping either one flips the answer.
WATCH OUT
Treating geometrical isomerism as implying optical isomerism
Optical activity needs the absence of any improper symmetry element, not merely the existence of two arrangements. has two geometrical isomers, fac and mer, and neither is chiral, because each carries a mirror plane. In the trans isomer has a plane through both chlorides and is inactive while only the cis isomer is a resolvable pair, giving three stereoisomers in total.
Why it happens: Both are stereoisomerism and they are usually taught together.
WATCH OUT
Using di, tri and tetra with ethane-1,2-diamine or oxalate
Ligands whose own names contain a multiplier take bis, tris and tetrakis instead, with the ligand name in parentheses. Tris(ethane-1,2-diamine) is unambiguous while a name built with tri would read as though the multiplier belonged to the ligand's own structure. This is one of the few nomenclature slips that changes what the name means rather than how it looks.
Why it happens: The simple prefixes work for ammine, aqua and chlorido, so they look universal.
WATCH OUT
Forgetting that CFSE can be zero and treating that as no answer
High spin gives exactly, and that zero predicts three separate observations: forms the weakest complexes of any first-row divalent ion, its complexes are almost colourless because every d-d transition is also spin-forbidden, and high spin has no crystal field preference between geometries. A zero is the answer, not the absence of one.
Why it happens: A zero looks like a failed calculation rather than a result.

Exam-pattern practice

PYQ-style questions with full solutions. Work through them as a readiness check — mark yourself honestly and get your gap report at the end.

Readiness check

Are you exam-ready for Coordination Compounds?

12 problems from this chapter. Try each one, reveal the worked solution, mark yourself honestly — get your gap report at the end.

12 questions~8 min worth ~8 marks in JEE Main exams

5-minute revision

The whole chapter, distilled. Read this the night before the exam.

  • Three questions run the chapter: what shape, what colour, what magnetism; cis- and trans-platin differ only by 90 degrees
  • Werner: primary valence is ionisable, secondary is directed; inner chloride will not precipitate, outer will
  • The octahedron was established by isomer counting: a hexagon or prism predicts three isomers, only two are ever found
  • Coordination number counts donor atoms; is three ligands and six bonds
  • Chelate effect is entropic: 4 particles in, 7 out, worth in for nickel; five- and six-rings least strained
  • bis, tris, tetrakis when the ligand name already has a multiplier; -ate plus a Latin stem for anionic complexes
  • Four structural isomerisms with four different diagnostics; nitrito-O is red and converts to yellow nitrito-N
  • gives cis and trans, gives fac and mer and neither is chiral, tetrahedral gives nothing
  • The ligand picks the geometry: is paramagnetic, is diamagnetic
  • against decides spin; so tetrahedral is always high spin
  • ; zero for high spin , and that zero predicts three observations
  • Stronger ligand means larger means shorter absorbed wavelength; you see the complement of what was absorbed

JEE Main question blueprint

How this topic is asked, tier by tier — so you can prep to the pattern.

Typical weightage: ~2 questions (8 marks) of the 100-mark Chemistry section

Question styleMarks eachTypical countWhat it tests
Valence bond and crystal field theory31Inner against outer orbital complexes, square planar against tetrahedral for $d^8$, high and low spin from the spectrochemical series, CFSE, and $\Delta_o$ obtained from the absorbed wavelength
Isomerism21Ionisation, hydrate and linkage isomers distinguished by precipitation tests, cis and trans geometries, and deciding when an octahedral complex is optically active
Werner's theory, nomenclature and ligands21Primary against secondary valency and the precipitation counting behind it, denticity and the chelate effect, and building or reversing an IUPAC name including the ligand ordering rules
Applications of coordination compounds11Chelation therapy and why a chelating agent is selective, extraction and purification processes, and the roles of coordination in haemoglobin and chlorophyll

Exam-hall strategy

Battle-tested tips from mentors and toppers for this topic under the sectional clock.

  1. Find the oxidation state and the d electron count before anything else. Every prediction about geometry, spin state, colour and magnetism depends on it, and they all fail together if it is wrong.
  2. For coordination number, count donor atoms and check every ligand's denticity. A single 'en' or EDTA in the formula is the whole point of the question.
  3. Decide high spin or low spin by placing the ligand in the spectrochemical series relative to water, then compute the unpaired count and only then the magnetic moment.
  4. For isomer counting, settle geometrical isomers first and test each one separately for a mirror plane. Two geometrical isomers with no chirality is a common and deliberate answer.
  5. For colour questions, chain the two inversions out loud: stronger ligand, larger , shorter absorbed wavelength, and the observed colour is the complement of the absorbed one.

Beyond the exam

Where this skill shows up in the job you're competing for — and in life.

Cis-platin has been treating testicular

Cis-platin has been treating testicular, ovarian and bladder cancers since 1978 by cross-linking adjacent guanine bases on one DNA strand, work only its cis geometry can do, while the trans isomer of the same formula is therapeutically inert

Lead poisoning is treated with EDTA given as its calcium …

Lead poisoning is treated with EDTA given as its calcium salt, exploiting a stability constant gap of more than seven orders of magnitude between and so the chelate takes the lead and releases harmless calcium

Gold and silver are won from low-grade ore by cyanide lea…

Gold and silver are won from low-grade ore by cyanide leaching, dissolving as soluble cyanido complexes and being displaced later by zinc, while nickel is purified through volatile tetracarbonylnickel in the Mond process

Where else this topic is tested

Prepare once, score in every exam that asks it.

JEE Main
JEE Advanced
NEET UG
BITSAT
CBSE Class 12 Chemistry

Questions aspirants ask

Pulled from the Q&A community and mentor sessions.

Because the drug works by cross-linking DNA, and a cross-link has a required reach. Once the two chloride ligands hydrolyse off, platinum has two adjacent binding sites available. In the cis isomer those sites are 90 degrees apart, which happens to match the spacing of two neighbouring guanine bases on the same DNA strand, so platinum grips both and kinks the helix badly enough to stall replication. In the trans isomer the two sites face in opposite directions, so platinum can still bind DNA but never two adjacent bases at once, and no cross-link forms. It is a geometric matching problem, and the formula, the bonds and the bond enthalpies are identical in both.

Almost, and the enthalpy contribution is usually small enough to ignore at this level. The bonds formed are near-identical, six Ni-N bonds either way, so the enthalpy change is similar for hexaammine and tris(en) nickel. What differs is the particle count: displacing six waters with three bidentate ligands turns four solute particles into seven, while displacing them with six ammonias leaves seven for seven. A positive of that size contributes tens of kilojoules to at room temperature, which is what the ratio in stability constant reflects. There are small enthalpic contributions from ring strain and from the ligand's own preorganisation, but entropy carries the effect.

It should not, on the model's own terms, and this is the theory's clearest failure. A purely electrostatic picture predicts that anionic ligands split the d orbitals more than neutral ones, and the spectrochemical series flatly contradicts that at the strong end. The real explanation involves covalency: CO and cyanide have empty antibonding orbitals that accept electron density back from the filled metal set, which lowers those orbitals and widens the gap. That is pi back-bonding, and accounting for it requires ligand field theory, a molecular orbital treatment beyond the JEE Main syllabus. For the exam, use the series as an empirical ranking and know that the model does not derive it.

Let the question choose. If it asks for hybridisation, or uses the words inner orbital and outer orbital, it wants valence bond theory, so write the orbital box diagram, pair electrons as the ligand demands, and read off the hybridisation. If it asks about colour, about , about CFSE, or about why one ligand gives a different spin state than another, it wants crystal field theory. Many questions ask for both on the same complex, which is a deliberate test of whether you can move between the two pictures for one physical situation. The magnetic moment comes out identical either way, which is the check that you have not mixed them up.

Because unpaired electron count and crystal field stabilisation are different quantities, and maximises the first while zeroing the second. Three electrons in at each and two in at each cancel exactly, so the ion gains nothing from the field regardless of ligand. That shows up three ways in the laboratory: sits at the bottom of the Irving-Williams stability order, its solutions are the palest of the first row because every d-d transition would also have to flip a spin and spin-forbidden transitions are extremely weak, and shows no crystal field preference between octahedral and tetrahedral so its geometry is set by ligand size and charge alone.

Header Logo